| auszookers.com https://auszookers.com/forum/ |
|
| size and number of body bolts, eg hindges, windsheild https://auszookers.com/forum/viewtopic.php?f=5&t=21720 |
Page 1 of 1 |
| Author: | experament-u2 [ Sat May 07, 2011 2:49 am ] |
| Post subject: | size and number of body bolts, eg hindges, windsheild |
hi wondering if anybody knows the sizes and number of bolts for the body eg hindge bolts, softtop windsheild and b pilar ect. (saves pulling them all out and couting how many of each there are), im going to get some stainless ones to replace them cheers |
|
| Author: | lump_a_charcoal [ Sat May 07, 2011 2:59 am ] |
| Post subject: | Re: size and number of body bolts, eg hindges, windsheild |
Make sure you get a good grade of stainless, as some stainless is soft as. |
|
| Author: | SuziBlu [ Sat May 07, 2011 3:03 am ] |
| Post subject: | Re: size and number of body bolts, eg hindges, windsheild |
316 |
|
| Author: | mondo [ Sat May 07, 2011 3:07 am ] |
| Post subject: | Re: size and number of body bolts, eg hindges, windsheild |
while stainless steel will look better, its actual shearing strength is lower then a grade 8 bolt. just some food for thought for body bolts etc |
|
| Author: | SuziBlu [ Sat May 07, 2011 3:13 am ] |
| Post subject: | Re: size and number of body bolts, eg hindges, windsheild |
IMO stainless is crap. It looks good, but shows no sign of strain, then one day, bang, its broken, black steel will show signs of stress. |
|
| Author: | SierraDan [ Sat May 07, 2011 3:32 am ] |
| Post subject: | Re: size and number of body bolts, eg hindges, windsheild |
I normally go with the zinc coated bolts. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|