| auszookers.com https://auszookers.com/forum/ |
|
| Front wt spring spacing https://auszookers.com/forum/viewtopic.php?f=5&t=21836 |
Page 1 of 1 |
| Author: | turbo_deo [ Tue May 10, 2011 9:40 pm ] |
| Post subject: | Front wt spring spacing |
Hi guys I'm in the process of moving my front spring perches on my hilux diffs to suit my widetrack and I'm just after the measurement between the spring locating pins, I did search but couldn't find a measurement |
|
| Author: | BlueSuzy [ Tue May 10, 2011 11:45 pm ] |
| Post subject: | Re: Front wt spring spacing |
Anyone who runs hilux diffs use the hilux spacing as the WT is too narrow and you will run into spring mounting in pumpkin problems. The Hilux diff perch is already modified to get it closer to the pumpkin standard. Any more will need cutting of the housing. |
|
| Author: | tanshi [ Tue May 10, 2011 11:46 pm ] |
| Post subject: | Re: Front wt spring spacing |
Im pretty sure you can use WT spacing but not NT |
|
| Author: | zooky08 [ Tue May 10, 2011 11:55 pm ] |
| Post subject: | Re: Front wt spring spacing |
If your after the wt spacing I think it's 950mm center hole to center hole Can't quite remember but I'm 99% sure |
|
| Author: | turbo_deo [ Tue May 10, 2011 11:57 pm ] |
| Post subject: | Re: Front wt spring spacing |
I've got the kit which welds to the original drivers side perch |
|
| Author: | zooky08 [ Tue May 10, 2011 11:59 pm ] |
| Post subject: | Re: Front wt spring spacing |
zooky08 wrote: If your after the wt spacing I think it's 950mm center hole to center hole Shit dont listen to me that's the rear Diff spacing not the front
Can't quite remember but I'm 99% sure |
|
| Author: | Ridge [ Wed May 11, 2011 12:20 am ] |
| Post subject: | Re: Front wt spring spacing |
if you have the sky kit mount that and stick the diff under the car to set the passenger perch in place. You can double check it is centered by measuring from the end of the diff to the spring on both sides. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|