| auszookers.com https://auszookers.com/forum/ |
|
| Are there any aftermarket alloy rims that fit a jimny??? https://auszookers.com/forum/viewtopic.php?f=5&t=22110 |
Page 1 of 2 |
| Author: | cunneen [ Fri May 20, 2011 3:19 am ] |
| Post subject: | Are there any aftermarket alloy rims that fit a jimny??? |
Hi Guys and gals Ive tried every tyre joint in town and they haven't had any luck getting me some decent looking alloys that will fit on the jimny dose anyone here know of any that fit? Thanks. |
|
| Author: | SuziBlu [ Fri May 20, 2011 3:41 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
I just had a quick check on the net, no idea of Jimny wheels stud placement, seems its the same as a vitara or sierra or f100. So your choice is near limitless. |
|
| Author: | tanshi [ Fri May 20, 2011 3:44 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
i have two sets forsale at the moment mate, there are atleast 2 other sets in the forsale thread. it will all depend on what size and offset your after. |
|
| Author: | zukenutter [ Fri May 20, 2011 3:47 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
Leaf sprung Sierra rims, particularly the Wide Track (WT) Sierras, have the same factory offset and stud pattern as Jimny so just tell them "To fit a Sierra". EDIT: Will be a good guide but you'll still want to ensure the offset and width they come up with are compatible. |
|
| Author: | BertZook [ Fri May 20, 2011 3:50 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
aparently the stud pattern 5 X 139.7
and im interested to know this too, as in a future i would like to get some alloys too.... dnt mind the steel wheels, but i just want to have something different to everyone else |
|
| Author: | cunneen [ Fri May 20, 2011 3:59 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
I can find some 15x8 inch rims but i'm not to sure they will fit under ? |
|
| Author: | tanshi [ Fri May 20, 2011 4:05 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
from memory standard rims are 6inch, with a +5 offset. if you go an inch bigger in width, you need to either go half an inch bigger in positive offset or start trying to cover tyres. my 15 x 8s have approx -10 offset. so they are going to hang out a ways. but i like offset soo... |
|
| Author: | zukenutter [ Fri May 20, 2011 4:06 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
cunneen wrote: I can find some 15x8 inch rims but i'm not to sure they will fit under ?
What size tyres do you want to run? |
|
| Author: | cunneen [ Fri May 20, 2011 4:07 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
235 75 15's and have 50mm lift if it helps |
|
| Author: | zukenutter [ Fri May 20, 2011 4:09 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
cunneen wrote: 235 75 15's and have 50mm lift if it helps
I wouldn't go bigger than 7" with 235s as they'll roll off the rims at low pressure. |
|
| Author: | tanshi [ Fri May 20, 2011 4:11 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
i have another set that 15 x 7 with a good positive offset. they need a really good polish. looking for $400 look like this
|
|
| Author: | cunneen [ Fri May 20, 2011 4:13 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
Tanshi, So i would need to get 7inch with about + 20 off set or 8 inch with about + 30 off set Is that right |
|
| Author: | tanshi [ Fri May 20, 2011 4:15 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
thats the theory i believe. but thats going to leave you with alot of wheel hanging inside the wheel arch, and it will probably foul on things. 7 inch is about as wide as i would go. |
|
| Author: | cunneen [ Fri May 20, 2011 4:16 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
[quote]I wouldn't go bigger than 7" with 235s as they'll roll off the rims at low pressure.[code] OH ok, didnt know that cheers. |
|
| Author: | 2stroker [ Fri May 20, 2011 4:17 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
Want33 has a set for sale he told me last night at the bbq |
|
| Author: | cunneen [ Fri May 20, 2011 4:19 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
I dont mind these they are 15x 7 but i dont know about the offset or stud spacings on them.
|
|
| Author: | tanshi [ Fri May 20, 2011 4:20 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
ew!! bbut any way what brand and model are they? |
|
| Author: | cunneen [ Fri May 20, 2011 4:28 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
they are speedy. lol they look better on tyres.
|
|
| Author: | tanshi [ Fri May 20, 2011 4:32 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
nope, by the looks they dont come in 5 stud |
|
| Author: | cunneen [ Fri May 20, 2011 4:35 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
I found here that a few people are running 15 x 7's on jimnys with neg 13 and neg 15 ? that dosnt fit in with this "Tanshi, So i would need to get 7inch with about + 20 off set or 8 inch with about + 30 off set Is that right" |
|
| Author: | tanshi [ Fri May 20, 2011 4:38 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
http://en.wikipedia.org/wiki/Offset_(wheel) |
|
| Author: | zukenutter [ Fri May 20, 2011 4:57 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
tanshi wrote: from memory standard rims are 6inch, with a +5 offset. Pretty sure they're 5.5 wide. tanshi wrote: http://en.wikipedia.org/wiki/Offset_(wheel)
Thanks for that Just went and measured my spare. Exactly 7" wide Mounting face of the wheel is exactly centred in the 7"s. So no offset at all, hadn't expected that. My XXalloysXX Mags I have no scrubbing issues although I'm on about 80'ish mm suspension lift. I think at 50mm a 235 on any rim will scrub. 60mm should work though. |
|
| Author: | cunneen [ Fri May 20, 2011 5:02 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
So it means that there is enough room to put wheels under the guards using 7 inch wide wheels with a negative off set? |
|
| Author: | tanshi [ Fri May 20, 2011 5:03 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
zukenutter wrote: tanshi wrote: from memory standard rims are 6inch, with a +5 offset. Pretty sure they're 5.5 wide. tanshi wrote: http://en.wikipedia.org/wiki/Offset_(wheel) Thanks for that Just went and measured my spare. Exactly 7" wide Mounting face of the wheel is exactly centred in the 7"s. So no offset at all, hadn't expected that. My XXalloysXX Mags I have no scrubbing issues although I'm on about 80'ish mm suspension lift. I think at 50mm a 235 on any rim will scrub. 60mm should work though. So your saying your 15 x 7s are 0 mm offset? correct? I suppose half an inch inward and outward isnt that much that it would hang out past the guards |
|
| Author: | tanshi [ Fri May 20, 2011 5:06 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
cunneen wrote: So it means that there is enough room to put wheels under the guards using 7 inch wide wheels with a negative off set?
7inch rims with negative offset are going to hang out of the guards by the amount of negative offset going by Zukenutters info above |
|
| Author: | zukenutter [ Fri May 20, 2011 5:09 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
tanshi wrote: cunneen wrote: So it means that there is enough room to put wheels under the guards using 7 inch wide wheels with a negative off set? 7inch rims with negative offset are going to hang out of the guards by the amount of negative offset going by Zukenutters info above Definitely tanshi wrote: zukenutter wrote: tanshi wrote: from memory standard rims are 6inch, with a +5 offset. Pretty sure they're 5.5 wide. tanshi wrote: http://en.wikipedia.org/wiki/Offset_(wheel) Thanks for that Just went and measured my spare. Exactly 7" wide Mounting face of the wheel is exactly centred in the 7"s. So no offset at all, hadn't expected that. My XXalloysXX Mags I have no scrubbing issues although I'm on about 80'ish mm suspension lift. I think at 50mm a 235 on any rim will scrub. 60mm should work though. So your saying your 15 x 7s are 0 mm offset? correct? I suppose half an inch inward and outward isnt that much that it would hang out past the guards YEP |
|
| Author: | cunneen [ Fri May 20, 2011 5:11 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
oh so im backwards lol |
|
| Author: | tanshi [ Fri May 20, 2011 5:14 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
yep, negative offset makes them stick out more. so anything 0 offset in 7 inch will be fine. any thing positive offset will be fine. |
|
| Author: | zukenutter [ Fri May 20, 2011 5:19 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
tanshi wrote: yep, negative offset makes them stick out more.
so anything 0 offset in 7 inch will be fine. any thing positive offset will be fine. Will start getting very close to chassis. I totally fluked it with mine, anything either way will start contacting. |
|
| Author: | tanshi [ Fri May 20, 2011 5:21 am ] |
| Post subject: | Re: Are there any aftermarket alloy rims that fit a jimny??? |
ok then i take it back! buy an LJ |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|