ay Damo, i think we need a new fabrication section on the forum
| auszookers.com https://auszookers.com/forum/ |
|
| 4age to sierra engine mounts https://auszookers.com/forum/viewtopic.php?f=5&t=2222 |
Page 1 of 1 |
| Author: | Pubic [ Tue Jun 03, 2008 2:09 pm ] |
| Post subject: | 4age to sierra engine mounts |
has anyone done this conversion before? does anyone have pics of engine mounts that have been used before. im considering using the original corolla mounts and making up cross members maybe. any ideas or advice would be appreciated. thanks in advance |
|
| Author: | dank [ Wed Jun 04, 2008 2:37 am ] |
| Post subject: | Re: 4age to sierra engine mounts |
as you know dude I'm going through this at the moment. There are some pics of guys who have done this on outers just need to search around. Drew off outers used a 200mmx100mmx10mm adapter for the drivers side engine mount off the original sierra chassis mounts then to the modded rwd 4a mounts. Looks like with normal rwd 4a mounts the engine sits too high. this is what i found on a test fit a couple of weeks ago....goona spend some mroe time on it this weekend i'll take pics.... |
|
| Author: | Pubic [ Wed Jun 04, 2008 1:24 pm ] |
| Post subject: | Re: 4age to sierra engine mounts |
thanks mate. ill buy some rwd mounts this weekend. i wanna make up some basic mounts and then once its all in place fab up something neater and stronger. |
|
| Author: | Damo [ Wed Jun 04, 2008 5:33 pm ] |
| Post subject: | Re: 4age to sierra engine mounts |
Check this thread out blokes, should give you some ideas. |
|
| Author: | steve [ Wed Jun 04, 2008 6:10 pm ] |
| Post subject: | Re: 4age to sierra engine mounts |
ay Damo, i think we need a new fabrication section on the forum
|
|
| Author: | Pubic [ Wed Jun 04, 2008 8:07 pm ] |
| Post subject: | Re: 4age to sierra engine mounts |
i remember this one... very nice.... thanks blokes, will be getting much more progress made now. |
|
| Author: | Damo [ Wed Jun 04, 2008 8:17 pm ] |
| Post subject: | Re: 4age to sierra engine mounts |
steve wrote: ay Damo, i think we need a new fabrication section on the forum
Not a bad idea. I think you should ask Royce though, after my 'big boy' jibe i'm lucky not to be banned 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|