auszookers.com
https://www.auszookers.com/forum/

exhaust pipe
https://www.auszookers.com/forum/viewtopic.php?f=5&t=22242		 Page 1 of 1
Author:  31zook [ Tue May 24, 2011 11:01 am ]
Post subject:  exhaust pipe
At the risk of sounding dumb, where do i buy straight lengths of the stuff and all the bend to cut up to make my own exhaust system?
zorst shop?

cheers :D
Author:  mnemonix [ Tue May 24, 2011 11:05 am ]
Post subject:  Re: exhaust pipe
Automace
48 fern st islington.
02 4927 6666.

I used to buy from them on a mates business account. Cheap as.
These days I usually just get my local exhaust bloke to grab what I need because he looks after me.

Can get pretty pricey depending on the size and number of bends you're using.
Author:  v6zookie [ Tue May 24, 2011 11:12 am ]
Post subject:  Re: exhaust pipe
Steel place at telara carries exhaust tubing. Not to sure about the bends thow you should be able to fab them up your self. wasn't all that dear ether.the bends you could get from any exzorst shop thow
Author:  BlueSuzy [ Tue May 24, 2011 12:53 pm ]
Post subject:  Re: exhaust pipe
Shouldnt need many bends 4 if your lucky.

I might be making up my zorst, have to buy a muffler, i already have a cheap cat from lowrange :)












meow
Author:  31zook [ Tue May 24, 2011 6:51 pm ]
Post subject:  Re: exhaust pipe
cheers mark, mick and tim :D i think ill be going to isllington, i just need to make a tight system that sit's above my chassis rail, and puts the muffler way up as well. Im guessing about 5m of 1.75in pipe with 6 90deg bends if i have tracked it right in my mind.....
Author:  31zook [ Wed May 25, 2011 10:30 am ]
Post subject:  Re: exhaust pipe
did you know for 1.75 pipe in a 6m length costs $60, and exhaust pipe is called (ACM) and it actually has an aluminium coating on it, now to source bends....
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/