key need's to be re learnt to the immob & ecu....
| auszookers.com https://auszookers.com/forum/ |
|
| HELP -What does the jimny immobilized unit look like HELP https://auszookers.com/forum/viewtopic.php?f=5&t=22285 |
Page 1 of 1 |
| Author: | kyzermattingley [ Thu May 26, 2011 12:30 am ] |
| Post subject: | HELP -What does the jimny immobilized unit look like HELP |
HISTORY just stripped the g13bb, box, all looms, dash and everything etc out of a early model Jim and put in everything out of a 2008 Jim, dash, all looms, etc. Used the Ecu, motor, key transponder, key receiver out of my 2008 Jim. Also swapped in two other modules from under my dash into his (no names on these though so not sure what the are). WHATS HAPPENING so the car cranks but doesn't fire, the immobilized light flashes and the manual just states that it's a problem with the immobilizer system. through for manuals but carnt find one for the m13a Jim |
|
| Author: | alien [ Thu May 26, 2011 12:31 am ] |
| Post subject: | Re: HELP -What does the jimny immobilized unit look like HELP |
shoot a PM to Taylor74 - he's pretty familiar with these. |
|
| Author: | kyzermattingley [ Thu May 26, 2011 12:42 am ] |
| Post subject: | Re: HELP -What does the jimny immobilized unit look like HELP |
alien wrote: shoot a PM to Taylor74 - he's pretty familiar with these.
Cheers, will do Brett |
|
| Author: | steak_knife [ Thu May 26, 2011 6:58 am ] |
| Post subject: | Re: HELP -What does the jimny immobilized unit look like HEL |
key need's to be re learnt to the immob & ecu....
|
|
| Author: | kyzermattingley [ Thu May 26, 2011 10:09 pm ] |
| Post subject: | Re: HELP -What does the jimny immobilized unit look like HEL |
steak_knife wrote: key need's to be re learnt to the immob & ecu....
The ECU, key and electrics have been swapped f.rom mine to his, just don't know what the immobilizer looks like, then I could be sure I've swapped it. Brett |
|
| Author: | royce [ Thu May 26, 2011 11:11 pm ] |
| Post subject: | Re: HELP -What does the jimny immobilized unit look like HEL |
Ive only got a g13bb manual here but I am sure the M13 is the same when I looked at it it shows the immobiliser module as being to the outside of the column (pic shows it on the left of the column on a LHD car) its got 10 pins on the connector going into it, |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|