SSSIERA wrote:
u would defs have to cut and weld the sump
are you for real?
| auszookers.com https://auszookers.com/forum/ |
|
| Barina engine https://auszookers.com/forum/viewtopic.php?f=5&t=22423 |
Page 1 of 1 |
| Author: | mcwilly [ Tue May 31, 2011 10:36 am ] |
| Post subject: | Barina engine |
Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc? |
|
| Author: | SSSIERA [ Tue May 31, 2011 10:37 am ] |
| Post subject: | Re: Barina engine |
u would defs have to cut and weld the sump |
|
| Author: | mcwilly [ Tue May 31, 2011 10:40 am ] |
| Post subject: | Re: Barina engine |
Oh k even spoa |
|
| Author: | Gwagensteve [ Tue May 31, 2011 10:42 am ] |
| Post subject: | Re: Barina engine |
Cutting the sump with a SPOA? Maybe. Better to just swap a 1.3 sierra sump on. You'll will have water neck and distributor problems. ( I assume it's a throttle body EFI motor) The distributor points straight out the back of the head, as does the water neck. Steve. |
|
| Author: | atari4x4 [ Tue May 31, 2011 10:45 am ] |
| Post subject: | Re: Barina engine |
SSSIERA wrote: u would defs have to cut and weld the sump
are you for real?
|
|
| Author: | 93zook [ Tue May 31, 2011 10:46 am ] |
| Post subject: | Re: Barina engine |
would be able to just bolt the intake manifold on? or even just the throttle body?? |
|
| Author: | Lukezuk [ Tue May 31, 2011 10:48 am ] |
| Post subject: | Re: Barina engine |
mcwilly wrote: Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc? . Why would you want a berina engine in your car ??
|
|
| Author: | Gwagensteve [ Tue May 31, 2011 10:50 am ] |
| Post subject: | Re: Barina engine |
Luke - Because they are fuel injected, are are easy to find in wreckers. Yes, manifolds could be swapped, but you loose the thermostat and water neck on the inlet manifold - it's on the back of the head on the barina engine. Steve |
|
| Author: | atari4x4 [ Tue May 31, 2011 10:50 am ] |
| Post subject: | Re: Barina engine |
matfan, is that you? |
|
| Author: | Lukezuk [ Tue May 31, 2011 10:53 am ] |
| Post subject: | Re: Barina engine |
Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra |
|
| Author: | Ben_Sierra [ Tue May 31, 2011 11:23 am ] |
| Post subject: | Re: Barina engine |
Lukezuk wrote: Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra
Who's made a trolling profile then? |
|
| Author: | Lukezuk [ Tue May 31, 2011 11:27 am ] |
| Post subject: | Re: Barina engine |
Ben_Sierra wrote: Lukezuk wrote: Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra Who's made a trolling profile then? Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering |
|
| Author: | steak_knife [ Tue May 31, 2011 11:29 am ] |
| Post subject: | Re: Barina engine |
Lukezuk wrote: Ben_Sierra wrote: Lukezuk wrote: Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra Who's made a trolling profile then? Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering Was he drunk??? Or a plumber???? 
|
|
| Author: | Lukezuk [ Tue May 31, 2011 11:31 am ] |
| Post subject: | Re: Barina engine |
It was at my 18th so I think he was lol |
|
| Author: | Red89 [ Tue May 31, 2011 11:42 am ] |
| Post subject: | Re: Barina engine |
steak_knife wrote: Lukezuk wrote: Ben_Sierra wrote: Lukezuk wrote: Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra Who's made a trolling profile then? Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering Was he drunk??? Or a plumber???? Fitter and turner, fits it in and turns it to shit
|
|
| Author: | Lukezuk [ Tue May 31, 2011 12:02 pm ] |
| Post subject: | Re: Barina engine |
Agreed |
|
| Author: | AJjnr86 [ Tue May 31, 2011 12:10 pm ] |
| Post subject: | Re: Barina engine |
im fitting a barina motor into my SJ70, only cause the motor that came with it has been overheated. it is the same engine, i just have to swap my exhaust manifold, intake manifold, timing belt sprockets and pullies (only reason for replacing these is cause the barina engine was used by the apprentices for practicing adjusting tappets and harmonic balancer is missing) i will need to compare sumps to know if i need to change that |
|
| Author: | Jester [ Tue May 31, 2011 8:31 pm ] |
| Post subject: | Re: Barina engine |
mcwilly wrote: Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc?
1996 barina isnt that the 1.4L opel one, not related to a G13? |
|
| Author: | 2stroker [ Wed Jun 01, 2011 10:15 am ] |
| Post subject: | Re: Barina engine |
Jester wrote: mcwilly wrote: Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc? 1996 barina isnt that the 1.4L opel one, not related to a G13? Jester you read my mind I think they have the Opel C14NZ engine, completely different family. |
|
| Author: | Ben_Sierra [ Wed Jun 01, 2011 10:56 am ] |
| Post subject: | Re: Barina engine |
2stroker wrote: Jester wrote: mcwilly wrote: Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc? 1996 barina isnt that the 1.4L opel one, not related to a G13? Jester you read my mind I think they have the Opel C14NZ engine, completely different family. Thats a good point... There were no G13 Barinas in 96... 1994 was when they changed from the Swift to the Opel Corsa... |
|
| Author: | mcwilly [ Wed Jun 01, 2011 1:20 pm ] |
| Post subject: | Re: Barina engine |
That's why I was checking I'm not really a barina expert lol |
|
| Author: | SSSIERA [ Thu Jun 02, 2011 3:05 pm ] |
| Post subject: | Re: Barina engine |
atari4x4 wrote: SSSIERA wrote: u would defs have to cut and weld the sump are you for real? ???? |
|
| Author: | xedent [ Thu Jun 02, 2011 7:26 pm ] |
| Post subject: | Re: Barina engine |
steak_knife wrote: Lukezuk wrote: Ben_Sierra wrote: Lukezuk wrote: Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra Who's made a trolling profile then? Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering Was he drunk??? Or a plumber???? Where not that bad are we ? Hahaha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|