G'day
Anyone know what size belt i will need to hook up my p/s?
It's a 96 swb efi vitara JX with NO a/c
I'm bolting it all in tomorrow so i wanted to have all the parts here ready to go
Cheers Joe
| auszookers.com https://auszookers.com/forum/ |
|
| p/s belt? https://auszookers.com/forum/viewtopic.php?f=5&t=22433 |
Page 1 of 1 |
| Author: | Joe [ Tue May 31, 2011 10:07 pm ] |
| Post subject: | p/s belt? |
G'day
Anyone know what size belt i will need to hook up my p/s? It's a 96 swb efi vitara JX with NO a/c I'm bolting it all in tomorrow so i wanted to have all the parts here ready to go
Cheers Joe |
|
| Author: | fire60 [ Tue May 31, 2011 11:46 pm ] |
| Post subject: | Re: p/s belt? |
I don't know if they are the same, but I have a 92 8v carby, and if all is standard they run a 4pk 810 for alternator and p/steer. pete |
|
| Author: | BlueSuzy [ Tue May 31, 2011 11:56 pm ] |
| Post subject: | Re: p/s belt? |
Get some string, loop the string around the pulleys with the tensioner about 1/4 tension position, measure length of string needed, write down measurement, go shopping with measurement with thought of single v or 4mulitv in supercrap or similar, choose checkout chick with boobs. With the tensioner in the 1/4 tension position, its so if you buy an exact size belt, you can get it on and off. I did mine with no tension, it was a pain because i couldnt move the tensioner to get some slack. I ended up driving it on with a screwdriver.. |
|
| Author: | mnemonix [ Tue May 31, 2011 11:57 pm ] |
| Post subject: | Re: p/s belt? |
fire60 wrote: I don't know if they are the same, but I have a 92 8v carby, and if all is standard they run a 4pk 810 for alternator and p/steer.
pete  My G16b bottom end with g16a power steering ran 4pk 810mm for both alt/ps.
|
|
| Author: | BlueSuzy [ Wed Jun 01, 2011 12:01 am ] |
| Post subject: | Re: p/s belt? |
Come to think of it.. mine did too.. vit ps on baleno 1.6 efi. My ps bracket i had to mod after, so thats prob why it was tight. |
|
| Author: | Joe [ Wed Jun 01, 2011 1:03 am ] |
| Post subject: | Re: p/s belt? |
My alt belt is a 800 
|
|
| Author: | BlueSuzy [ Wed Jun 01, 2011 1:06 am ] |
| Post subject: | Re: p/s belt? |
10mm longer is not much.. Means the tensioner will only be moved 5mm more. |
|
| Author: | Joe [ Wed Jun 01, 2011 1:11 am ] |
| Post subject: | Re: p/s belt? |
Ok ill measure with string first and go that way, ill update in here what size i went with 
Thanks people
|
|
| Author: | Joe [ Wed Jun 01, 2011 1:12 am ] |
| Post subject: | Re: p/s belt? |
BlueSuzy wrote: choose checkout chick with boobs
|
|
| Author: | appsie [ Wed Jun 01, 2011 3:03 am ] |
| Post subject: | Re: p/s belt? |
both mine are 4pk800s for alt and p/s on a g16b in my sierra |
|
| Author: | steak_knife [ Wed Jun 01, 2011 7:18 am ] |
| Post subject: | Re: p/s belt? |
Joe wrote: My alt belt is a 800
So's both of mine.....
|
|
| Author: | Joe [ Wed Jun 01, 2011 8:28 am ] |
| Post subject: | Re: p/s belt? |
steak_knife wrote: Joe wrote: My alt belt is a 800 So's both of mine..... As in att & p/s on Sully or att on Sully and att on the dd?
|
|
| Author: | steak_knife [ Wed Jun 01, 2011 8:31 am ] |
| Post subject: | Re: p/s belt? |
Joe wrote: steak_knife wrote: Joe wrote: My alt belt is a 800 So's both of mine..... As in att & p/s on Sully or att on Sully and att on the dd? Alt w/pump & p/s belt's the same size, I only carry one spare belt that way & that's what fit's......... Joe, what do ya know!!!
|
|
| Author: | Joe [ Wed Jun 01, 2011 8:35 am ] |
| Post subject: | Re: p/s belt? |
steak_knife wrote: Joe, what do ya know!!! I know a bit about power steering belts now
Cheers guys
|
|
| Author: | steak_knife [ Wed Jun 01, 2011 8:40 am ] |
| Post subject: | Re: p/s belt? |
If the p/s pump if it was fitted with a/c will be solid mounted, but you can move one bolt & turn the bracket into it's own adjuster....... You know more now...... 
|
|
| Author: | Joe [ Wed Jun 01, 2011 8:43 am ] |
| Post subject: | Re: p/s belt? |
steak_knife wrote: If the p/s pump if it was fitted with a/c will be solid mounted, but you can move one bolt & turn the bracket into it's own adjuster.......
You know more now...... I was looking at how that works today 
|
|
| Author: | steak_knife [ Wed Jun 01, 2011 8:45 am ] |
| Post subject: | Re: p/s belt? |
|
I was part way through making an adjuster when I spotted that.... 
|
|
| Author: | Joe [ Thu Jun 02, 2011 7:03 am ] |
| Post subject: | Re: p/s belt? |
I ended up using a 800 for p/s aswell
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|