auszookers.com :: View topic - NT Spacing on WT

It works on a NT sierra with WT diffs. So much so that its considered a very desirable mod. So why you are asking this question is beyond me

Get on with it already :wink:

You should FUR it! :p

I just wasnt sure of other considerations that need to be addressed.

Also, wasnt sure if there were any specific ways to correctly glue the hangers from beside the chassis to underneath the chassis other than doing it.

Prefer to ask the dudes who know than fuck it up.

:lol: not worth the effort i say, ruf it and see how you like it...

if your moving mounts around, why not ruf it at the same time?

probaly a stupid question but whats the difference between nt and wt??

what sort of benifits do you get from a wt sierra though

dbona2 wrote:

what sort of benifits do you get from a wt sierra though

a wt is a little bit wider and a bit newer. nt lwb's are the coolest but. :wink:

shep wrote:

dbona2 wrote:

what sort of benifits do you get from a wt sierra though

a wt is a little bit wider and a bit newer. nt lwb's are the coolest but. :wink:

If they have WT diffs

Flex. Keeping a good approach angle. And something different.

SierraDan wrote:

Flex. Keeping a good approach angle. And something different.

1/4 elliptical

dan will get it done before you damo :lol:

JrZook wrote:

SierraDan wrote:

Flex. Keeping a good approach angle. And something different.

1/4 elliptical

What's that?

Author:	SierraDan [ Wed Jun 01, 2011 9:30 am ]
Post subject:	NT Spacing on WT
Considering options for front end flex. Who has done NT spacing on a factory WT Sierra? How do you find it? What Needs to be considered? Is the effort worth it? Any problems encountered? EDIT: Other than the obvious Relocating of perches and hangers. Cheers.

Author:	zooktastic [ Wed Jun 01, 2011 10:14 am ]
Post subject:	Re: NT Spacing on WT
i have a wt diff here set up for nt spacing complete. the zook it came off flexed really well

Author:	Fatzook [ Wed Jun 01, 2011 10:29 am ]
Post subject:	Re: NT Spacing on WT
It works on a NT sierra with WT diffs. So much so that its considered a very desirable mod. So why you are asking this question is beyond me Get on with it already

Author:	SierraDan [ Wed Jun 01, 2011 10:32 am ]
Post subject:	Re: NT Spacing on WT
I just wasnt sure of other considerations that need to be addressed. Also, wasnt sure if there were any specific ways to correctly glue the hangers from beside the chassis to underneath the chassis other than doing it. Prefer to ask the dudes who know than fuck it up.

Author:	31zook [ Wed Jun 01, 2011 10:45 am ]
Post subject:	Re: NT Spacing on WT
not worth the effort i say, ruf it and see how you like it...

auszookers.com https://auszookers.com/forum/

NT Spacing on WT https://auszookers.com/forum/viewtopic.php?f=5&t=22446	Page 1 of 2

Author:	steak_knife [ Wed Jun 01, 2011 10:53 am ]
Post subject:	Re: NT Spacing on WT
Fatzook wrote: It works on a NT sierra with WT diffs. So much so that its considered a very desirable mod. So why you are asking this question is beyond me Get on with it already

Author:	stockman [ Wed Jun 01, 2011 10:54 am ]
Post subject:	Re: NT Spacing on WT
You should FUR it! :p

Author:	steak_knife [ Wed Jun 01, 2011 10:55 am ]
Post subject:	Re: NT Spacing on WT
stockman wrote: You should FUR it! :p then shave the door handle's!!!!

Author:	Fatzook [ Wed Jun 01, 2011 10:56 am ]
Post subject:	Re: NT Spacing on WT
SierraDan wrote: I just wasnt sure of other considerations that need to be addressed. Also, wasnt sure if there were any specific ways to correctly glue the hangers from beside the chassis to underneath the chassis other than doing it. Prefer to ask the dudes who know than fuck it up. Just copy the NT setup. Do as suzuki did. Can't go wrong

Author:	SierraDan [ Wed Jun 01, 2011 11:10 am ]
Post subject:	Re: NT Spacing on WT
31zook wrote: :lol: not worth the effort i say, ruf it and see how you like it... Don't want to have a chassis poking out the front, I like vertical approach angles. And don't have to stuff around with springs and shit. But as I said, considering multiple options.

Author:	31zook [ Wed Jun 01, 2011 11:11 am ]
Post subject:	Re: NT Spacing on WT
coils

Author:	SierraDan [ Wed Jun 01, 2011 11:16 am ]
Post subject:	Re: NT Spacing on WT
That would be ideal haha. Way out of my ability me thinks.

Author:	Ridge [ Thu Jun 02, 2011 4:14 am ]
Post subject:	Re: NT Spacing on WT
if your moving mounts around, why not ruf it at the same time?

Author:	dbona2 [ Thu Jun 02, 2011 4:17 am ]
Post subject:	Re: NT Spacing on WT
probaly a stupid question but whats the difference between nt and wt??

Author:	Damo [ Thu Jun 02, 2011 5:10 am ]
Post subject:	Re: NT Spacing on WT
I'll be doing this to my WT when I do the RUF, along with custom spring packs. If you're comfortable with the reduction in roll stiffness that results there's no reason not to do it IMO.

Page 1 of 2	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	SierraDan [ Thu Jun 02, 2011 4:28 am ]
Post subject:	Re: NT Spacing on WT
Ridge wrote: if your moving mounts around, why not ruf it at the same time? Not sure I want RUF. that's why I'm looking at other options. dbona2 wrote: probaly a stupid question but whats the difference between nt and wt?? NT(Narrow Track) Sierras have the springs mounted under the chassis. WT(Wide Track) Sierras have the springs mounted beside (outside) the chassis

Author:	dbona2 [ Thu Jun 02, 2011 4:31 am ]
Post subject:	Re: NT Spacing on WT
what sort of benifits do you get from a wt sierra though

Author:	SierraDan [ Thu Jun 02, 2011 4:36 am ]
Post subject:	Re: NT Spacing on WT
WT Sierras have a wider diff, so more stable.

Author:	shep [ Thu Jun 02, 2011 4:36 am ]
Post subject:	Re: NT Spacing on WT
dbona2 wrote: what sort of benifits do you get from a wt sierra though a wt is a little bit wider and a bit newer. nt lwb's are the coolest but.

Author:	SierraDan [ Thu Jun 02, 2011 4:40 am ]
Post subject:	Re: NT Spacing on WT
shep wrote: dbona2 wrote: what sort of benifits do you get from a wt sierra though a wt is a little bit wider and a bit newer. nt lwb's are the coolest but. If they have WT diffs

Author:	31zook [ Thu Jun 02, 2011 4:42 am ]
Post subject:	Re: NT Spacing on WT
so what are you actually after? more flex? better ride? a different car? to everyone else? confused?

Author:	SierraDan [ Thu Jun 02, 2011 4:44 am ]
Post subject:	Re: NT Spacing on WT
Flex. Keeping a good approach angle. And something different.

Author:	shep [ Thu Jun 02, 2011 4:45 am ]
Post subject:	Re: NT Spacing on WT
SierraDan wrote: shep wrote: dbona2 wrote: what sort of benifits do you get from a wt sierra though a wt is a little bit wider and a bit newer. nt lwb's are the coolest but. If they have WT diffs nope. a nt lwb with wt diffs is in the awesome category.

Author:	JrZook [ Thu Jun 02, 2011 4:47 am ]
Post subject:	Re: NT Spacing on WT
SierraDan wrote: Flex. Keeping a good approach angle. And something different. 1/4 elliptical

Author:	SierraDan [ Thu Jun 02, 2011 4:50 am ]
Post subject:	Re: NT Spacing on WT
JrZook wrote: SierraDan wrote: Flex. Keeping a good approach angle. And something different. 1/4 elliptical What's that?

Author:	SierraDan [ Thu Jun 02, 2011 4:51 am ]
Post subject:	Re: NT Spacing on WT

Author:	31zook [ Thu Jun 02, 2011 5:19 am ]
Post subject:	Re: NT Spacing on WT
dan will get it done before you damo

Author:	Damo [ Thu Jun 02, 2011 5:23 am ]
Post subject:	Re: NT Spacing on WT
31zook wrote: dan will get it done before you damo Cool, I can see how it works on his first. I've more guard chopping and diff repairs to do before I start that

Author:	JrZook [ Thu Jun 02, 2011 5:30 am ]
Post subject:	Re: NT Spacing on WT
SierraDan wrote: JrZook wrote: SierraDan wrote: Flex. Keeping a good approach angle. And something different. 1/4 elliptical What's that? Research. If you can somehow put it on teh front you will have an awesome approach angle + you wanted to be different

Author:	SierraDan [ Thu Jun 02, 2011 5:41 am ]
Post subject:	Re: NT Spacing on WT
Is it legal?