| auszookers.com https://auszookers.com/forum/ |
|
| Flares ? https://auszookers.com/forum/viewtopic.php?f=5&t=22449 |
Page 1 of 1 |
| Author: | redrocketsj50 [ Wed Jun 01, 2011 11:05 am ] |
| Post subject: | Flares ? |
So I want new flares for my Sierra where can I get bush wackers from in Australia or something along the same line ? |
|
| Author: | sbbunno [ Wed Jun 01, 2011 1:07 pm ] |
| Post subject: | Re: Flares ? |
lowrange http://www.lowrangeoffroad.com/suzuki/samurai.html |
|
| Author: | TryHard [ Wed Jun 01, 2011 1:28 pm ] |
| Post subject: | Re: Flares ? |
ya but u will need to email them about shipping ,,, |
|
| Author: | alien [ Wed Jun 01, 2011 1:31 pm ] |
| Post subject: | Re: Flares ? |
when you say you want new flares, how much are your tyres sticking out??? im using the 50mm flares from clark rubber and theyve been brilliant - because my tyres are outside my metal flares if i fall into a rut the rubber just bends out of the way and the tyres rest on the bank rather than damaging anything... the rubber is also weaker than the screws holding it in, so if i do hit it hard enough i can just replace the rubber strip. most of the aftermarket ones are solid plastic and landing on them will dent the body its attached to as well as being prone to scratching and gouging. |
|
| Author: | TryHard [ Wed Jun 01, 2011 1:55 pm ] |
| Post subject: | Re: Flares ? |
alien wrote: when you say you want new flares, how much are your tyres sticking out??? im using the 50mm flares from clark rubber and theyve been brilliant - because my tyres are outside my metal flares if i fall into a rut the rubber just bends out of the way and the tyres rest on the bank rather than damaging anything... the rubber is also weaker than the screws holding it in, so if i do hit it hard enough i can just replace the rubber strip.
most of the aftermarket ones are solid plastic and landing on them will dent the body its attached to as well as being prone to scratching and gouging. your very right there mate iv dented my side where my jeep flares where .. |
|
| Author: | BlueSuzy [ Wed Jun 01, 2011 2:26 pm ] |
| Post subject: | Re: Flares ? |
I recently bought 2 sets of 4 rear bushwackers. (8 altogether) Postage was $320usd for 1 set or same $320usd for 2 sets. So i got 2 sets as its still under the 1k exemption, shared postage with someone else and it works out abit cheaper than just buying 1 set. |
|
| Author: | SSSIERA [ Wed Jun 01, 2011 2:43 pm ] |
| Post subject: | Re: Flares ? |
bunnings flares.... cheep and replacable |
|
| Author: | TryHard [ Wed Jun 01, 2011 3:53 pm ] |
| Post subject: | Re: Flares ? |
BlueSuzy wrote: I recently bought 2 sets of 4 rear bushwackers. (8 altogether)
Postage was $320usd for 1 set or same $320usd for 2 sets. So i got 2 sets as its still under the 1k exemption, shared postage with someone else and it works out abit cheaper than just buying 1 set. wow i thought it was more exp might pick some up . |
|
| Author: | boostedbrick [ Wed Jun 01, 2011 11:22 pm ] |
| Post subject: | Re: Flares ? |
Landrover flares are cheap.. Bushwackers from what ive seen and been told wont like running along banks too much. Depends on how much you like you panels i guess. |
|
| Author: | BlueSuzy [ Wed Jun 01, 2011 11:44 pm ] |
| Post subject: | Re: Flares ? |
boostedbrick wrote: Landrover flares are cheap.. Bushwackers from what ive seen and been told wont like running along banks too much. Depends on how much you like you panels i guess.
Depends on brands of bushwackers. There are many copies. Mine are genuine, in a bushwacker box. I will be running tube on the outside anyway, 7" isnt wide enough for mine.. |
|
| Author: | burls [ Thu Jun 02, 2011 2:12 am ] |
| Post subject: | Re: Flares ? |
Bushwackers look great and hide just about any rubber. You can pretty much squash them to the body and they come back no worries. Problem as said before is they dont like being squashed and rubbed along the bank/rocks. I have had to plastic weld mine a few times already(at the mount holes). If you gonna put them on get some protection for them. |
|
| Author: | TryHard [ Thu Jun 02, 2011 2:52 am ] |
| Post subject: | Re: Flares ? |
If only someone could make a Soft plastic Flexy Version of them or stupidly tough version |
|
| Author: | redrocketsj50 [ Thu Jun 02, 2011 8:36 am ] |
| Post subject: | Re: Flares ? |
What about piranha flares , can u get bushwhackers in Australia ? |
|
| Author: | Gwagensteve [ Thu Jun 02, 2011 9:00 am ] |
| Post subject: | Re: Flares ? |
burls wrote: Problem as said before is they dont like being squashed and rubbed along the bank/rocks. I have had to plastic weld mine a few times already(at the mount holes). If you gonna put them on get some protection for them.
And this is why I don't like bushwackers. A flare that needs protection from rubbing against a bank is pointless - if theflares need a bar to protect them just take the flares off and run rubber/urethane/polycarbonate/whatever from the bar to the body. I am aware we spend lots of time jammed against banks here in Vic, and not everyone wheels that kind of terrain, but I've heard the same story about broken mounts enough to reckon Bushwackers are either made of the wrong material or are badly designed. Steve. |
|
| Author: | burls [ Thu Jun 02, 2011 11:25 am ] |
| Post subject: | Re: Flares ? |
Yes you may be right but amazingly the thing with the wackers is they come back to shape. Cant say the same about standard flares with rubber hanging off them. Yes it is a shame they dont hold on better but personally I would have these any day |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|