[Goldy]

Just wondering if anyone knows any good places to get these in Austraila? Preferably WA... lowrangeoffroad are always good but you can imagine the shipping for something like this is a little hard to justify.

Cheers

[shep]

i gave up trying to get a aussie one so i just bought one from lowrange.

[shep]

http://www.auszookers.com/index.php?nam ... ne&start=0

[Rusho]

A certain Suzuki parts specialist on here is in the process of making them. So message him constantly until he gets the point Look in the buisness section for TSOR

[steak_knife]

Rusho wrote:

A certain Suzuki parts specialist on here is in the process of making them. So message him constantly until he gets the point Look in the buisness section for TSOR

I don't think that work's....

[TryHard]

its all good buying from Aust but the problems some people dont like to wait eg me if i have the money il spend it one way or another

[atari4x4]

steak_knife wrote:

Rusho wrote:

A certain Suzuki parts specialist on here is in the process of making them. So message him constantly until he gets the point Look in the buisness section for TSOR

I don't think that work's....

but it's worth a shot.... Pete you have PM

[TryHard]

I Want Joe to get back to me or is that just wishfull thinking

i think he droped of the planet again

[shep]

good luck waiting for joe.

[TryHard]

yerp well just hit anoy bloody problem in looking for winch bar ..

i just contracted 4wd usa .. a place that sells gear over here i was gona get
the CALMINI "C3" Front Winch Bumper Problem is they dont make it for 2inch body lift ... was thinking of making some plates up not sure how hard this is ..

[Fatzook]

TryHard wrote:

yerp well just hit anoy bloody problem in looking for winch bar ..

i just contracted 4wd usa .. a place that sells gear over here i was gona get
the CALMINI "C3" Front Winch Bumper Problem is they dont make it for 2inch body lift ... was thinking of making some plates up not sure how hard this is ..

Don't bother. Its highly illegal. Unless you are prepared to modify it so that it meets australian safety regs.

[shakes]

http://auszookers.com/index.php?name=Fo ... ic&t=21511

see if pj still has his

[TryHard]

Fatzook wrote:

TryHard wrote:

yerp well just hit anoy bloody problem in looking for winch bar ..

i just contracted 4wd usa .. a place that sells gear over here i was gona get
the CALMINI "C3" Front Winch Bumper Problem is they dont make it for 2inch body lift ... was thinking of making some plates up not sure how hard this is ..

Don't bother. Its highly illegal. Unless you are prepared to modify it so that it meets australian safety regs.

whys it illegal ? .. .

[TryHard]

shakes wrote:

http://auszookers.com/index.php?name=Forums&file=viewtopic&t=21511

see if pj still has his

just sent him msg thanks

[SierraDan]

they have razor blade bars on them haha.

[Fatzook]

TryHard wrote:

Fatzook wrote:

TryHard wrote:

yerp well just hit anoy bloody problem in looking for winch bar ..

i just contracted 4wd usa .. a place that sells gear over here i was gona get
the CALMINI "C3" Front Winch Bumper Problem is they dont make it for 2inch body lift ... was thinking of making some plates up not sure how hard this is ..

Don't bother. Its highly illegal. Unless you are prepared to modify it so that it meets australian safety regs.

whys it illegal ? .. .

The recover tags and the uprights are considered to be pedestrian killers

They need to have a 30mm wide flat face. 5mm thick plate steel on its edge would be like a knife if you hit a person at speed ( 40kph+)

Have a look at any aftermarket bullbar in australia that complies with the safety standards and you will see that all plate edges are capped across their forward facing plane.

[TryHard]

Fatzook wrote:

TryHard wrote:

Fatzook wrote:

TryHard wrote:

yerp well just hit anoy bloody problem in looking for winch bar ..

i just contracted 4wd usa .. a place that sells gear over here i was gona get
the CALMINI "C3" Front Winch Bumper Problem is they dont make it for 2inch body lift ... was thinking of making some plates up not sure how hard this is ..

Don't bother. Its highly illegal. Unless you are prepared to modify it so that it meets australian safety regs.

whys it illegal ? .. .

The recover tags and the uprights are considered to be pedestrian killers

They need to have a 30mm wide flat face. 5mm thick plate steel on its edge would be like a knife if you hit a person at speed ( 40kph+)

Have a look at any aftermarket bullbar in australia that complies with the safety standards and you will see that all plate edges are capped across their forward facing plane.

o yerp yerp