yea sound reduced to me. my stock gearing is crap in low range. can do like 20kmh in 1st. got 6.5's on the way tho
transfer gears will change high range too. 31's would be bad without them
| auszookers.com https://auszookers.com/forum/ |
|
| need to confirm ive go crawler gears https://auszookers.com/forum/viewtopic.php?f=5&t=22459 |
Page 1 of 1 |
| Author: | CompTruck [ Thu Jun 02, 2011 7:09 am ] |
| Post subject: | need to confirm ive go crawler gears |
hi guys. just got a sierra. meant to have reduction gears. pretty sure it does based on the way it goes in low range but wanna check with you guys. car has 31 inch mud tyres. if i put it in 4wd low in 1st and second i dont think the speedo even moves. in 4th in low range it does a max speed of 30kmh. even at 7000rpm its only doing 30kmh. so does it sound like crawler gears. meant to be the 6.1 or something gears. or is it maybe normal or possible its got the 1l transfer case? its a 1990 1.3 litre wide track. thanks guys |
|
| Author: | taszook [ Thu Jun 02, 2011 7:16 am ] |
| Post subject: | Re: need to confirm ive go crawler gears |
yea sound reduced to me. my stock gearing is crap in low range. can do like 20kmh in 1st. got 6.5's on the way tho
transfer gears will change high range too. 31's would be bad without them |
|
| Author: | TryHard [ Thu Jun 02, 2011 7:19 am ] |
| Post subject: | Re: need to confirm ive go crawler gears |
Yup Thats Def 6.5s for ya  gota love them or hate them
|
|
| Author: | taszook [ Thu Jun 02, 2011 7:40 am ] |
| Post subject: | Re: need to confirm ive go crawler gears |
speedo wont move in 2nd low with 5.14 either  i guess another way is to turn the input shaft and count the output shaft (or vice versa) of the tcase. done this on my dads to discover it has 5.1's from our guess haha
|
|
| Author: | steve [ Thu Jun 02, 2011 7:52 am ] |
| Post subject: | Re: need to confirm ive go crawler gears |
if it had a standard case you'd be doing 80kph in low 4, take the crawler gears out, you'll never be able to race it like that 
|
|
| Author: | CompTruck [ Thu Jun 02, 2011 7:54 am ] |
| Post subject: | Re: need to confirm ive go crawler gears |
thanks guys. im happy now. dont really care what ratio they are aslong as they are reduction gears as that and the front and rear lockers are the reason i bought the car |
|
| Author: | rexxar [ Fri Jun 03, 2011 2:21 am ] |
| Post subject: | Re: need to confirm ive go crawler gears |
this is what I did to mine to check if it had 6.5 - which it did
Put gearbox in neutral... Hubs unlocked... Transfer in 4lo If you have an open rear diff you can jack up one rear wheel and support with an axle stand Then turn the shafts to count the ratio....No need to remove any bolts. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|