auszookers.com
https://www.auszookers.com/forum/

1.6 conversion need help
https://www.auszookers.com/forum/viewtopic.php?f=5&t=22591		 Page 1 of 1
Author:  AxL_ [ Mon Jun 06, 2011 9:00 am ]
Post subject:  1.6 conversion need help
hi guys i cooked my 1 ltr wana go the 1.6 vit "g16b'' i think need to no what has to be done and if i need a 1.3 5 speed or the stock vit box
Author:  boostedbrick [ Mon Jun 06, 2011 9:06 am ]
Post subject:  Re: 1.6 conversion need help
Some good info in here. AFAIK going from a 1ltr is more involved than from a 1.3.. Someone can confirm this.

http://www.auszookers.com/index.php?nam ... pic&t=4853
Author:  xedent [ Mon Jun 06, 2011 9:10 am ]
Post subject:  Re: 1.6 conversion need help
Yes, engine mounts are in different spots then a 1.3L, Depending on what 1l sierra it is so are the gearbox mounts and the tunnel is also smaller.
Author:  zooky08 [ Mon Jun 06, 2011 9:11 am ]
Post subject:  Re: 1.6 conversion need help
Yea engine mounts need to be changed nd pretty sure the nt 1lt have a smaller tunnel so the 1.3 5speed might not fit
Some one confirm this. Yes or no?
Author:  zooky08 [ Mon Jun 06, 2011 9:11 am ]
Post subject:  Re: 1.6 conversion need help
To slow :(
Author:  Gwagensteve [ Mon Jun 06, 2011 9:20 am ]
Post subject:  Re: 1.6 conversion need help
Skip the 1.3 5 speed and go straight to the Vitara transmission - if you have to do tunnel work anyway, do a bit more and avoid the smaller clutch/adapter plate.

Steve.

Yes, all mounts will have to be moved.
Author:  jimbo_jones [ Mon Jun 06, 2011 10:19 am ]
Post subject:  Re: 1.6 conversion need help
Gwagensteve wrote:
Skip the 1.3 5 speed and go straight to the Vitara transmission - if you have to do tunnel work anyway, do a bit more and avoid the smaller clutch/adapter plate.

Steve.

Yes, all mounts will have to be moved.







if you do a 2" body lift will the 1.3 box fit ok?
Author:  Gwagensteve [ Mon Jun 06, 2011 11:05 am ]
Post subject:  Re: 1.6 conversion need help
I think so.

Steve.
Author:  shandy92 [ Mon Jun 06, 2011 1:18 pm ]
Post subject:  Re: 1.6 conversion need help
he is already running a body lift, not quite 2" but some home made thing.
Author:  BlueSuzy [ Mon Jun 06, 2011 1:35 pm ]
Post subject:  Re: 1.6 conversion need help
Lower the engine mounts and you wont need a bodylift.

Also depends on sump clearance.
Author:  AxL_ [ Tue Jun 07, 2011 1:36 am ]
Post subject:  Re: 1.6 conversion need help
Thanks for the feed back im sure to have a faster zook in the comeing months :)
Author:  Fatzook [ Tue Jun 07, 2011 2:16 am ]
Post subject:  Re: 1.6 conversion need help
Gwagensteve wrote:
Skip the 1.3 5 speed and go straight to the Vitara transmission - if you have to do tunnel work anyway, do a bit more and avoid the smaller clutch/adapter plate.

Steve.

Yes, all mounts will have to be moved.


X2. SIerra 5sp is a bag of shit :wink:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/