Thanks guys.
Gasket kit is on it's way, I can't wait.
Now to just sort out the rest of the car.
| auszookers.com https://auszookers.com/forum/ |
|
| F8a sump bolts https://auszookers.com/forum/viewtopic.php?f=5&t=22641 |
Page 1 of 1 |
| Author: | sideways [ Tue Jun 07, 2011 1:14 pm ] |
| Post subject: | F8a sump bolts |
I've got a F8a with no sump bolts, among the pile of random bolts I got with the car, 4 fit, three are different lengths. So, Are all the sump bolts the same length? What are the length(s)? Also, length of the bolts that hold the dizzy housing on? Thanks Hayden |
|
| Author: | hooki [ Tue Jun 07, 2011 4:34 pm ] |
| Post subject: | Re: F8a sump bolts |
i'm pretty sure the sump bolts are all the same length except the 2 that screw into the rear main seal housing. I'm not sure about the dizzy bolts though. |
|
| Author: | 303zuke [ Wed Jun 08, 2011 9:27 pm ] |
| Post subject: | Re: F8a sump bolts |
All 14 Sump bolts are the same length, but I don't have any to measure. Each of the 3 Dizzy housing bolts are different lengths, but all M8 thread. |
|
| Author: | want33s [ Wed Jun 08, 2011 9:32 pm ] |
| Post subject: | Re: F8a sump bolts |
Sump bolts are same as 1.3. |
|
| Author: | losfer [ Thu Jun 09, 2011 12:39 pm ] |
| Post subject: | Re: F8a sump bolts |
want33s wrote: Sump bolts are same as 1.3.
nahh g series engines use a m6 x 12 , and f series use a m6 x 16 |
|
| Author: | want33s [ Thu Jun 09, 2011 8:33 pm ] |
| Post subject: | Re: F8a sump bolts |
losfer wrote: want33s wrote: Sump bolts are same as 1.3. nahh g series engines use a m6 x 12 , and f series use a m6 x 16 OK... I used a few 1.3 bolts in an F10 a while ago without dramas.... |
|
| Author: | sideways [ Fri Jun 10, 2011 8:55 am ] |
| Post subject: | Re: F8a sump bolts |
Thanks guys. Gasket kit is on it's way, I can't wait.
Now to just sort out the rest of the car.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|