| auszookers.com https://auszookers.com/forum/ |
|
| Cooling system pressure. https://auszookers.com/forum/viewtopic.php?f=5&t=22658 |
Page 1 of 1 |
| Author: | BlueSuzy [ Wed Jun 08, 2011 9:10 am ] |
| Post subject: | Cooling system pressure. |
When a motor is up to normal temp, does anyone know what kind of water pressure it builds up to? Just welded up a pipe for my bal motor and tested it to 60psi with water..no leaks. |
|
| Author: | Fatzook [ Wed Jun 08, 2011 9:13 am ] |
| Post subject: | Re: Cooling system pressure. |
I thought it was about 30psi. |
|
| Author: | gypsy [ Wed Jun 08, 2011 9:15 am ] |
| Post subject: | Re: Cooling system pressure. |
to what evea the psi on the rad cap is |
|
| Author: | BlueSuzy [ Wed Jun 08, 2011 9:15 am ] |
| Post subject: | Re: Cooling system pressure. |
Dont know? Gotta get one of those |
|
| Author: | mattybish [ Wed Jun 08, 2011 9:33 am ] |
| Post subject: | Re: Cooling system pressure. |
should be between 15-22 psi, depends on the cooling system |
|
| Author: | BlueSuzy [ Wed Jun 08, 2011 9:47 am ] |
| Post subject: | Re: Cooling system pressure. |
Ok my pipe passed the bench test. Thanks guys |
|
| Author: | stockman [ Wed Jun 08, 2011 9:49 am ] |
| Post subject: | Re: Cooling system pressure. |
Pics of the pipe! Same as the old one? |
|
| Author: | BlueSuzy [ Wed Jun 08, 2011 10:24 am ] |
| Post subject: | Re: Cooling system pressure. |
nup! Looks shnazzy. Will post a pic of engine and gearbox complete all clean at a later date |
|
| Author: | steak_knife [ Wed Jun 08, 2011 10:24 am ] |
| Post subject: | Re: Cooling system pressure. |
gypsy wrote: to what evea the psi on the rad cap is
Bingo.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|