| auszookers.com https://auszookers.com/forum/ |
|
| Vitara LWB FRont Bar and Moutns https://auszookers.com/forum/viewtopic.php?f=5&t=22683 |
Page 1 of 1 |
| Author: | pyrohamish [ Thu Jun 09, 2011 3:36 am ] |
| Post subject: | Vitara LWB FRont Bar and Moutns |
How have people mounted their front bar work? At the moment im looking at going through the sort of chassis extension bit where the current bumper bolts down vertically onto and crush tubing it. Second wheres some piks at of decent bars? |
|
| Author: | got_bar_work [ Thu Jun 09, 2011 9:46 pm ] |
| Post subject: | Re: Vitara LWB FRont Bar and Moutns |
I have the 4 8mm bolts that hold the bumper on 3 12mm bolts in the holes in the lower cross member And 4 12 mm bolts with crush tube in the end of chassis rail And the side bars 
I have since added a dimple died front skid plate and centered slime line number plate 
|
|
| Author: | pyrohamish [ Fri Jun 10, 2011 1:11 am ] |
| Post subject: | Re: Vitara LWB FRont Bar and Moutns |
looks the goods |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|