auszookers.com
https://auszookers.com/forum/

Rotary into a jimny
https://auszookers.com/forum/viewtopic.php?f=5&t=22686
Page 1 of 1

Author:  Bazooka [ Thu Jun 09, 2011 5:17 am ]
Post subject:  Rotary into a jimny

Greets dudes and dudettes. A mate bought a Jimny that fell over from the auctions and he is gunna lop the top off it for a farm hack. He is a mechanical wizard that could put an F1-11 engine in a mini if he put his mind to it so I have no doubt he will have no trouble bunging a 13b into a Jimny (Would be 20b if he could find / afford one)

So he has some steep hills and lots of gravel tracks to play on (Harvey area) but im just wondering how he will go with the rotary. I love the rotors myself (a 20b at full song just makes my pecker hard) but cant imagine what a Zook would be like with rotoary it in ???

Any ideas

Author:  dank [ Thu Jun 09, 2011 5:21 am ]
Post subject:  Re: Rotary into a jimny

should be alright, still a relatively light vehicle being made even lighter so should go ok. probably be pretty thirsty but if he can get a cheap engine then why not. if its a farm hack put whatever engine you want into it.

the jimny drive train isn't overly strong that would be the only issue with a more powerful motor

Author:  Fatzook [ Thu Jun 09, 2011 5:26 am ]
Post subject:  Re: Rotary into a jimny

dank wrote:
should be alright, still a relatively light vehicle being made even lighter so should go ok. probably be pretty thirsty but if he can get a cheap engine then why not. if its a farm hack put whatever engine you want into it.

the jimny drive train isn't overly strong that would be the only issue with a more powerful motor


this will be his biggest concern.

Author:  [E-Z] [ Thu Jun 09, 2011 5:29 am ]
Post subject:  Re: Rotary into a jimny

Rx7 box and rwd

Author:  jonno_racing [ Thu Jun 09, 2011 5:31 am ]
Post subject:  Re: Rotary into a jimny

and?

Author:  JrZook [ Thu Jun 09, 2011 5:33 am ]
Post subject:  Re: Rotary into a jimny

[E-Z] wrote:
Rx7 box and rwd


And?.....................peanut diffs?

Imma waiting for the *rotary's have no torque* internet hero brigade to show up. They must be a bit slow and sleepy today :lol:

Author:  Fatzook [ Thu Jun 09, 2011 5:37 am ]
Post subject:  Re: Rotary into a jimny

Rotaries have no torque :wink:

Author:  dano_mung [ Thu Jun 09, 2011 5:37 am ]
Post subject:  Re: Rotary into a jimny

E-Z wrote:
Rx7 box and rwd


And then kick yourself everyday forever for having a 4wd that isn't 4wd and now just makes more noise, chews more fuel and is of no use to anybody. :crazy: :steamroller:

Author:  MrRocky [ Thu Jun 09, 2011 8:16 am ]
Post subject:  Re: Rotary into a jimny

brap brap brap BANG :crazy:

Author:  shakes [ Thu Jun 09, 2011 8:33 am ]
Post subject:  Re: Rotary into a jimny

And they have started.

If he has the time space and money just do it. Would be a fun car if you can get the power through the drivetrain to the wheels.

Author:  monley [ Thu Jun 09, 2011 8:36 am ]
Post subject:  Re: Rotary into a jimny

:helloo: Bye drive train

I was speaking to another member from perth a few weeks ago who was planing on putting a sr20 into his jimny. :crazy: But he;s not going to go any more cus of the whole weak drive train thing.

Author:  SierraDan [ Thu Jun 09, 2011 10:09 am ]
Post subject:  Re: Rotary into a jimny

Rotaries are 8)
Have a go at it!

Author:  matt91112011 [ Thu Jun 09, 2011 10:52 am ]
Post subject:  Re: Rotary into a jimny

Dooo itt!!!

Rotories FTMFW!!!

Author:  smiffkid [ Thu Jun 09, 2011 11:33 am ]
Post subject:  Re: Rotary into a jimny

do it, should go pretty good just take it easy on the drive train, expecially if your doing alot of skids in 2wd

Author:  Rockhopper [ Thu Jun 09, 2011 7:25 pm ]
Post subject:  Re: Rotary into a jimny

smiffkid wrote:
do it, should go pretty good just take it easy on the drive train, expecially if your doing alot of skids in 2wd


Defeats the purpose does'nt it? If you're going to rotor it, it needs to be flogged.
Like anything, it can be done, but too much effort for my liking.

Author:  smiffkid [ Thu Jun 09, 2011 10:43 pm ]
Post subject:  Re: Rotary into a jimny

just build a lux diff for the back, its not going to be road driven so wont be to hard

Author:  dominator [ Fri Jun 10, 2011 10:51 pm ]
Post subject:  Re: Rotary into a jimny

I was gonna jump onto the no torque train but if it is just a farm hack I reckon do it, its not like your tryin to win TT 2012. Would be so much fun on gravel roads.

Author:  Jezza86 [ Mon Feb 09, 2015 11:36 am ]
Post subject:  Re: Rotary into a jimny

so, did this happen?

Author:  MrRocky [ Mon Feb 09, 2015 4:20 pm ]
Post subject:  Re: Rotary into a jimny

It never happens

Author:  greenzook89 [ Mon Feb 09, 2015 8:51 pm ]
Post subject:  Re: Rotary into a jimny

MrRocky wrote:
It never happens


Fact. And sometimes those that do keep it on the down low..

Author:  Marko_SJ [ Mon Feb 09, 2015 11:56 pm ]
Post subject:  Re: Rotary into a jimny

greenzook89 wrote:
MrRocky wrote:
It never happens


Fact. And sometimes those that do keep it on the down low..


Wouldn't you?

Author:  Jezza86 [ Tue Feb 10, 2015 7:39 am ]
Post subject:  Re: Rotary into a jimny

Marko_SJ wrote:
Wouldn't you?

Probably not...


Author:  greenzook89 [ Tue Feb 10, 2015 8:47 am ]
Post subject:  Re: Rotary into a jimny

Marko_SJ wrote:
greenzook89 wrote:
MrRocky wrote:
It never happens


Fact. And sometimes those that do keep it on the down low..


Wouldn't you?


I would, but there would be plenty who would love to post shit over facebook :lol:

Author:  Marko_SJ [ Tue Feb 10, 2015 9:41 am ]
Post subject:  Re: Rotary into a jimny

Jezza86 wrote:
Marko_SJ wrote:
Wouldn't you?

Probably not...



Mine pulls better revs :thefinger:

greenzook89 wrote:
Marko_SJ wrote:
greenzook89 wrote:
MrRocky wrote:
It never happens


Fact. And sometimes those that do keep it on the down low..


Wouldn't you?


I would, but there would be plenty who would love to post shit over facebook :lol:


For those sort of things I think its best to just keep it to your self and maybe share it on here when you are done.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/