auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

g16a carby

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

dusted79

az supporter

Joined: Fri May 27, 2011 2:55 pm
Posts: 56
Location: Hervey Bay

Posted: Mon Jun 13, 2011 3:48 am

Just put another carby on the zook and it idles perfect but when I put my driving lights on the revs climb to 15-1600 any ideas?

_________________
94 SWB Vitara

Yer I Can Find You...

FullyZooked

az supporter

Joined: Mon Oct 25, 2010 9:01 am
Posts: 1009
Location: Bendigo

Posted: Mon Jun 13, 2011 5:34 am

Idle up solinoid is on the front of the carb. It runs a vacuum pot with a long linkage to the throttle shaft. Have someone turn the fan on whilst you are watching the linkages. You will see the setscrew and turn this out until idle drops to around 1000rpm.

_________________
Built Suzuki's shall reign Victorious.

dusted79

az supporter

Joined: Fri May 27, 2011 2:55 pm
Posts: 56
Location: Hervey Bay

Posted: Mon Jun 13, 2011 7:16 am

This is done while I'm running the car? Will this change the revs when the lights are off as they are at 800

_________________
94 SWB Vitara

Yer I Can Find You...

FullyZooked

az supporter

Joined: Mon Oct 25, 2010 9:01 am
Posts: 1009
Location: Bendigo

Posted: Mon Jun 13, 2011 2:42 pm

Yes only adjust the idle up when the car is running so you can get it to the preffered rpm. When your acc.- blower, lights Are switched off the idle will return to normal idle rpm (800rpm)

_________________
Built Suzuki's shall reign Victorious.

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 314 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum