auszookers.com • View topic - Filling gearbox 92 vitara

Board index » Talking About Stuff » Suzuki Talk

Filling gearbox 92 vitara

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Thu Jun 09, 2011 8:05 am

The level plug on my gear box has been rounded off and I can't get it out.

I decided to fill the box from the top, and took the gear shift out to fill it from there. I can't seem to get any oil in this way. What is the best way to fill from the top?

Pete

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Thu Jun 09, 2011 8:11 am

Why won't the oil go in? Best option would be to weld a nut to the filler plug or use a cold chisel to get that bung out, then replace it.

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Thu Jun 09, 2011 8:14 am

I thouht filling from the top would be an easier option to start with, but I may have to resort to the weld option. Should I be able to fill through where the gear stick goes in??

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Thu Jun 09, 2011 8:20 am

Been a while since I've had a Vit stick out but I'd think it should, may just take a while to dribble thru?

FullyZooked

az supporter

Joined: Mon Oct 25, 2010 9:01 am
Posts: 1009
Location: Bendigo

Posted: Thu Jun 09, 2011 8:53 am

Does things right the first time. Weld a nut on the plug, remove and replace.

_________________
Built Suzuki's shall reign Victorious.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Jun 09, 2011 8:57 am

Vit has a semi remote shifter, would take a long time to fill through the shifter hole...

_________________
I used to be indecisive,
now I'm not so sure.....

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Thu Jun 09, 2011 9:12 am

Dead right there! Plan B weld nut on, should have done that in the 1st place.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Jun 09, 2011 9:26 am

steak_knife wrote:

Vit has a semi remote shifter, would take a long time to fill through the shifter hole...

X2. The oils only passage through to the box is beside the remote shifter rods. You'll be there for weeks!

_________________
2013 GV
1998 SV420 ute

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Fri Jun 10, 2011 2:10 am

fire60 wrote:

The level plug on my gear box has been rounded off and I can't get it out.

I know everyone here is all for welding, but if you don't have one, try this.

Buy a Kincrome 11mm square sump adaptor (yes strange they actually make these - I got mine in a set that didn't have a 10mm so I had to grind mine down anyway), then grind half a mm or so off 2 of the sides until it will almost fit in the rounded hole - hit it with a hammer to jam it firmly in the hole, attach breaker bar and remove the plug. Buy a new plug for next time, and grind the square adaptor to an even 10mm - use that and you'll never end up with rounded plugs again.

fire60

Joined: Sat Oct 16, 2010 2:02 am
Posts: 96
Location: Wellington NZ

Posted: Fri Jun 10, 2011 3:56 am

Thanks for the help. I will chase one of those up for next time. I have welded a short bolt on (easier to hold when on your own) and got it out. New oil in, will be able to drive this weekend!!

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 425 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum