[Lockie666]

Over the past couple of weeks I've noticed a vibration coming through the rear, it's only when I've come to a complete stop and I'm taking off when it's at its worst. I can see the transfer stick vibrating quite erratic, I'm just wondering what could cause this? I'm leaning towards the tail shaft - Uni joints.

[SSSIERA]

transfer mounts??

[Rusho]

Is it a harmonic vibration?? Or a transfer mount broken vibration??

[Lockie666]

It's not a broken transfer mount. I've looked countless times, it's harmonic for sure, just worse under load more than anything.

[Rusho]

UNI's

[Lockie666]

Thought so

Guess I will do that ASAP, if that doesn't work I will report back. Cheers Rusho.

[Lockie666]

Any idea where I can get a decent set of uni joints?

[Rusho]

Lockie666 wrote:

Thought so

Guess I will do that ASAP, if that doesn't work I will report back. Cheers Rusho.

I'm only guessing, process of elimination really. Local bearing supply shops are usually a good place for uni's, ebay, Weaves

[Joe]

Hey Chris i had the same problem in bullant and it was the uni's on the jack shaft from the gearbox to tranfercase not the rear tail shaft like i first thought
To check if it's the jack shaft just put the transfer in neutral and go through the gears and see if the vibration is still there

[Rusho]

Joe wrote:

To check if it's the jack shaft just put the transfer in neutral and go through the gears and see if the vibration is still there

Not as silly as I thought you were Joe

[Joe]

Rusho wrote:

Joe wrote:

To check if it's the jack shaft just put the transfer in neutral and go through the gears and see if the vibration is still there

Not as silly as I thought you were Joe

get fucked

[Rusho]

Joe wrote:

Rusho wrote:

Joe wrote:

To check if it's the jack shaft just put the transfer in neutral and go through the gears and see if the vibration is still there

Not as silly as I thought you were Joe

get fucked

[hooki]

your's is a coily right? What about rear control arm bushes?

[31zook]

Joe wrote:

Hey Chris i had the same problem in bullant and it was the uni's on the jack shaft from the gearbox to tranfercase not the rear tail shaft like i first thought
To check if it's the jack shaft just put the transfer in neutral and go through the gears and see if the vibration is still there

knock the tcase into N and put it through it's gears, thats how u realised my jack shaft uni's were no good.....

[royce]

Lockie666 wrote:

Any idea where I can get a decent set of uni joints?

I bought from this guy a week ago

http://www.ebay.com.au/itm/Uni-Joint-SE ... 35a996189d

GMB brand (good) express posted the same day

I got Vit ones so may pay to ask if the sierra ones are still gmb brand

[xedent]

^^^ using the same ones, there made in japan

[Lockie666]

hooki wrote:

your's is a coily right? What about rear control arm bushes?

just recently replaced them mate. I checked the jackshaft today no vibration with transfer in neutral. Im sorting out uni joints today... All of the transfer mounts look good, worth replacing anyway?