| auszookers.com https://auszookers.com/forum/ |
|
| g16a carby https://auszookers.com/forum/viewtopic.php?f=5&t=22812 |
Page 1 of 1 |
| Author: | dusted79 [ Mon Jun 13, 2011 3:48 am ] |
| Post subject: | g16a carby |
Just put another carby on the zook and it idles perfect but when I put my driving lights on the revs climb to 15-1600 any ideas? |
|
| Author: | FullyZooked [ Mon Jun 13, 2011 5:34 am ] |
| Post subject: | Re: g16a carby |
Idle up solinoid is on the front of the carb. It runs a vacuum pot with a long linkage to the throttle shaft. Have someone turn the fan on whilst you are watching the linkages. You will see the setscrew and turn this out until idle drops to around 1000rpm. |
|
| Author: | dusted79 [ Mon Jun 13, 2011 7:16 am ] |
| Post subject: | Re: g16a carby |
This is done while I'm running the car? Will this change the revs when the lights are off as they are at 800 |
|
| Author: | FullyZooked [ Mon Jun 13, 2011 2:42 pm ] |
| Post subject: | Re: g16a carby |
Yes only adjust the idle up when the car is running so you can get it to the preffered rpm. When your acc.- blower, lights Are switched off the idle will return to normal idle rpm (800rpm) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|