done
thanks guys
| auszookers.com https://auszookers.com/forum/ |
|
| g16b flywheel bolt torque setttings https://auszookers.com/forum/viewtopic.php?f=5&t=22822 |
Page 1 of 1 |
| Author: | dp87 [ Mon Jun 13, 2011 7:51 am ] |
| Post subject: | g16b flywheel bolt torque setttings |
hey guys im just about to install my sierra flywheel to my g16b. just wondering what the torque setting is for the 6 bolts |
|
| Author: | dp87 [ Mon Jun 13, 2011 7:52 am ] |
| Post subject: | Re: g16b flywheel bolt torque setttings |
also what setting should i use for the bolts that attach the clutch to the flywheel? |
|
| Author: | swifty_ano [ Mon Jun 13, 2011 7:56 am ] |
| Post subject: | Re: g16b flywheel bolt torque setttings |
All I can say is make sure you use locktite. |
|
| Author: | MG410 [ Mon Jun 13, 2011 9:30 am ] |
| Post subject: | Re: g16b flywheel bolt torque setttings |
Flywheel bolts 54-57 lb ft (75-80 NM) use Blue Lock-tight,you can get a small $2.50 satchel from SuperCheap, and Clutch 14-20 lb ft (18-28 NM) |
|
| Author: | dp87 [ Mon Jun 13, 2011 10:15 am ] |
| Post subject: | Re: g16b flywheel bolt torque setttings |
done thanks guys
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|