does your passenger side rad mount have 2 nuts welded in there
the factory sierra ones bolted in there but had a different tab, that you could weld onto yours
| auszookers.com https://auszookers.com/forum/ |
|
| Power steering reserviour https://auszookers.com/forum/viewtopic.php?f=5&t=22839 |
Page 1 of 1 |
| Author: | Damo [ Tue Jun 14, 2011 4:59 am ] |
| Post subject: | Power steering reserviour |
Where did you mount yours? I've got a Vit one and i've been trying to get it to sit nicely where it would in the Vit but it's not playing ball. Ideas? |
|
| Author: | royce [ Tue Jun 14, 2011 5:03 am ] |
| Post subject: | Re: Power steering reserviour |
does your passenger side rad mount have 2 nuts welded in there the factory sierra ones bolted in there but had a different tab, that you could weld onto yours
|
|
| Author: | Rusho [ Tue Jun 14, 2011 5:05 am ] |
| Post subject: | Re: Power steering reserviour |
Fits kind of ok here 
|
|
| Author: | tanshi [ Tue Jun 14, 2011 5:06 am ] |
| Post subject: | Re: Power steering reserviour |
i used one from a mazda 626, mounts with two blots flat ontop of the wheel arch |
|
| Author: | Damo [ Tue Jun 14, 2011 5:09 am ] |
| Post subject: | Re: Power steering reserviour |
| Author: | Rusho [ Tue Jun 14, 2011 5:13 am ] |
| Post subject: | Re: Power steering reserviour |
| Author: | royce [ Tue Jun 14, 2011 5:38 am ] |
| Post subject: | Re: Power steering reserviour |
Damo wrote: I would have a look at Buddie's Vit i've got here in the shed but I can't get the bonnet open
 did you look in the glovebox 
|
|
| Author: | atari4x4 [ Tue Jun 14, 2011 5:55 am ] |
| Post subject: | Re: Power steering reserviour |
royce wrote: Damo wrote: I would have a look at Buddie's Vit i've got here in the shed but I can't get the bonnet open did you look in the glovebox 
|
|
| Author: | Damo [ Tue Jun 14, 2011 5:58 am ] |
| Post subject: | Re: Power steering reserviour |
Stupid homo hairdresser car....
I made a bracket to extend the rad mount a bit, that should work OK |
|
| Author: | 31zook [ Tue Jun 14, 2011 6:51 am ] |
| Post subject: | Re: Power steering reserviour |
corrolla resi, i think it looks stock almost 
|
|
| Author: | jonno_racing [ Tue Jun 14, 2011 7:36 am ] |
| Post subject: | Re: Power steering reserviour |
i need to do something with mine.. its kinda just ziptied out of the way lol. |
|
| Author: | MART [ Tue Jun 14, 2011 8:31 am ] |
| Post subject: | Re: Power steering reserviour |
Mine was mounted to radiator support , Cheers Paul. 
|
|
| Author: | BlueSuzy [ Tue Jun 14, 2011 1:20 pm ] |
| Post subject: | Re: Power steering reserviour |
Mine was mounted to the lower part of the jack holder 
|
|
| Author: | christover1 [ Tue Jun 14, 2011 1:28 pm ] |
| Post subject: | Re: Power steering reserviour |
|
|
| Author: | Jazzor [ Wed Jun 15, 2011 11:45 am ] |
| Post subject: | Re: Power steering reserviour |
Pvc downpipe clip onto the jack mount. I think mines a falcon one from ebay. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|