| auszookers.com https://auszookers.com/forum/ |
|
| Noob Q - Pulley/Bearing noise https://auszookers.com/forum/viewtopic.php?f=5&t=22898 |
Page 1 of 1 |
| Author: | TheOtherLeft [ Thu Jun 16, 2011 4:40 am ] |
| Post subject: | Noob Q - Pulley/Bearing noise |
Further to one of my previous posts about a strange rattling noise I pulled my main belt off and spun some of the pulleys by hand. This is what it looks/sounds like: Pulley noise The first pulley is the idler. It doesn't sound too smooth. Does it need replacing? What's annoying is that bearing was replaced only a few 000km ago by my mechanic. It's part number is: Nachi 32N2002. Does this seem right? The second pulley is the Tensioner pulley and sounds OK. The third pulley is the power steering pump. Whilst it sounds OK there is a little wobble/movement, maybe 1mm or so. Is this normal? You can see the movement in the video. The other pulleys - waterpump, alt and A/C sounded/felt fine. What do you guys think? Thanks all. |
|
| Author: | fordem [ Thu Jun 16, 2011 9:02 pm ] |
| Post subject: | Re: Noob Q - Pulley/Bearing noise |
Sorry - I don't have audio on my desktop (I know, I know - that's just the way I am) so - J20A engine - serpentine belt idler & tensioner pulleys - IF you can hear any noise at all - the bearings are either dead or dying. For the idler, the original bearing is an NSK 6005DUL1 - a 6005-2RS should work - I don't find any details on the Naachi, not even on Nacchi's website |
|
| Author: | TheOtherLeft [ Fri Jun 17, 2011 12:04 am ] |
| Post subject: | Re: Noob Q - Pulley/Bearing noise |
fordem wrote: Sorry - I don't have audio on my desktop (I know, I know - that's just the way I am) so - J20A engine - serpentine belt idler & tensioner pulleys - IF you can hear any noise at all - the bearings are either dead or dying.
For the idler, the original bearing is an NSK 6005DUL1 - a 6005-2RS should work - I don't find any details on the Naachi, not even on Nacchi's website I think this is the website: Nachi Yeah I'm going to chase up the mechanic who replaced the idler bearing. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|