Lockie666 wrote:
Put a peice of paper in front of the head. If it sucks to it then its fine.
like this?
| auszookers.com https://auszookers.com/forum/ |
|
| Snorkel problem https://auszookers.com/forum/viewtopic.php?f=5&t=22961 |
Page 1 of 1 |
| Author: | redrocketsj50 [ Fri Jun 17, 2011 11:34 am ] |
| Post subject: | Snorkel problem |
Please help I fitted a snorkel that I was running on my old Sierra to my new coily same style set up anyway it's not letting the engine suck in enough air what could I do to get more air |
|
| Author: | alexvitara [ Fri Jun 17, 2011 11:41 am ] |
| Post subject: | Re: Snorkel problem |
where is it being restricted? |
|
| Author: | redrocketsj50 [ Fri Jun 17, 2011 11:50 am ] |
| Post subject: | Re: Snorkel problem |
It seems to be where the snorkel goes into the air box there is none of that vacuum shit there I blocked it all off |
|
| Author: | sogone [ Fri Jun 17, 2011 11:53 am ] |
| Post subject: | Re: Snorkel problem |
Pics? |
|
| Author: | redrocketsj50 [ Fri Jun 17, 2011 11:59 am ] |
| Post subject: | Re: Snorkel problem |
Photobucket won't work on my phone , would the air pipe from the hat going to the air box be affected if the bow or curve in the pipe sat higher than the carby hat ? |
|
| Author: | sogone [ Fri Jun 17, 2011 12:05 pm ] |
| Post subject: | Re: Snorkel problem |
Not at all. With my body lift I had to modify the hat so it was almost a 180 degree bend from carby hat to air box. |
|
| Author: | redrocketsj50 [ Fri Jun 17, 2011 12:09 pm ] |
| Post subject: | Re: Snorkel problem |
I have flexy piping from the hat to the box frOm the hat so it doesn't matter if that's higher in any spots |
|
| Author: | sogone [ Fri Jun 17, 2011 12:17 pm ] |
| Post subject: | Re: Snorkel problem |
Nope. |
|
| Author: | 89_tintop [ Fri Jun 17, 2011 10:58 pm ] |
| Post subject: | Re: Snorkel problem |
What makes you think that it is sucking enough air? Are you having problems with how the car runs? Like revs dieing down.. Car not starting?? |
|
| Author: | Lockie666 [ Sat Jun 18, 2011 12:42 am ] |
| Post subject: | Re: Snorkel problem |
Can you take a pic please???? |
|
| Author: | atari4x4 [ Sat Jun 18, 2011 12:44 am ] |
| Post subject: | Re: Snorkel problem |
have you check to see if anything was blocking the snorkel or if there are any kinks in the flexy hose. as lockie said... pics. |
|
| Author: | Lockie666 [ Sat Jun 18, 2011 1:07 am ] |
| Post subject: | Re: Snorkel problem |
Put a peice of paper in front of the head. If it sucks to it then its fine. |
|
| Author: | alexvitara [ Sat Jun 18, 2011 8:27 am ] |
| Post subject: | Re: Snorkel problem |
Lockie666 wrote: Put a peice of paper in front of the head. If it sucks to it then its fine.
like this?
|
|
| Author: | redrocketsj50 [ Sat Jun 18, 2011 9:11 am ] |
| Post subject: | Re: Snorkel problem |
Haha sorry guy I think I found the problem it's my carby being gay the jets keep blocking i used the back fire trick it worked for a bit I Also used carby cleaner which worked well what else works ? |
|
| Author: | Built4thrashing [ Sat Jun 18, 2011 12:35 pm ] |
| Post subject: | Re: Snorkel problem |
carby shops work well with that problem. |
|
| Author: | christover1 [ Sun Jun 19, 2011 7:47 am ] |
| Post subject: | Re: Snorkel problem |
This cold weather and high speeds can freeze the carby jets. I had to run my Sierra with snorkle turned off, thus sucking warm air from under bonnet, when weather was this cold. Stopping for a minute, heat from donk would rise and melt blockage, then off I went. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|