sierra...hopefully
if the sierra diff cant handle 35's then ill just stick with 33's
| auszookers.com https://auszookers.com/forum/ |
|
| vitara rear diff strength? https://auszookers.com/forum/viewtopic.php?f=5&t=23017 |
Page 1 of 1 |
| Author: | 93zook [ Sun Jun 19, 2011 10:01 am ] |
| Post subject: | vitara rear diff strength? |
gday guys. how strong is a vitara rear diff? is it going to be stronger than a sierra? would it be able to run a 35 on rocks? |
|
| Author: | remydog05 [ Sun Jun 19, 2011 10:25 am ] |
| Post subject: | Re: vitara rear diff strength? |
From what Im told the ring and pinon is stronger but the axles are similar strength. |
|
| Author: | zooker [ Sun Jun 19, 2011 10:29 am ] |
| Post subject: | Re: vitara rear diff strength? |
There used to be a sierra back in wollongong running a vit rear diff and 37's. Don't think he had any issues |
|
| Author: | 93zook [ Sun Jun 19, 2011 10:35 am ] |
| Post subject: | Re: vitara rear diff strength? |
cool, recon a sierra front would hold up tp 35's with cromo axles? |
|
| Author: | zookcubr [ Sun Jun 19, 2011 10:40 am ] |
| Post subject: | Re: vitara rear diff strength? |
If your using a vit rear diff in the rear, what are you using up front? |
|
| Author: | 93zook [ Sun Jun 19, 2011 10:46 am ] |
| Post subject: | Re: vitara rear diff strength? |
sierra...hopefully if the sierra diff cant handle 35's then ill just stick with 33's
|
|
| Author: | Joe [ Sun Jun 19, 2011 10:47 am ] |
| Post subject: | Re: vitara rear diff strength? |
93zook wrote: sierra...hopefully
if the sierra diff cant handle 35's then ill just stick with 33'sVitara diffs are wider then sierra |
|
| Author: | 93zook [ Sun Jun 19, 2011 10:49 am ] |
| Post subject: | Re: vitara rear diff strength? |
yeah thats cool, just means ill loose the spacers in the rear. |
|
| Author: | Brett [ Sun Jun 19, 2011 10:52 am ] |
| Post subject: | Re: vitara rear diff strength? |
wrong off set for the center. |
|
| Author: | 93zook [ Sun Jun 19, 2011 11:27 am ] |
| Post subject: | Re: vitara rear diff strength? |
will that worry it too much you recon? the rear is 400mm longer and the drive shaft is about 920mm. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|