So moral of this story = go EFI.
| auszookers.com https://auszookers.com/forum/ |
|
| 1.6 tank in Sierra https://auszookers.com/forum/viewtopic.php?f=5&t=23067 |
Page 1 of 1 |
| Author: | Bennyzarb [ Mon Jun 20, 2011 8:13 am ] |
| Post subject: | 1.6 tank in Sierra |
I was just wondering cause I am doing a 2 in body lift this weekend how easy is it to fit a 1.6 fuel tank in a sierra with still a standard 1.3 engine can u buy one with out a fuel pump ? And how big are the fuel tanks Or is there any other fuel tanks that fit |
|
| Author: | zooky08 [ Mon Jun 20, 2011 8:49 am ] |
| Post subject: | Re: 1.6 tank in Sierra |
I ask this last week A lwb vitara tank are 760x490 I measured were I will want the tank and the smallest area between the chassis rail is 750mm so just move it towards the back abit But I think it might be to long Vit tank is 70mm longer the the standard 1.3 tank Will require new mounts. Fatzook said it's no point unless your going efi as well. |
|
| Author: | Crunched [ Mon Jun 20, 2011 9:14 am ] |
| Post subject: | Re: 1.6 tank in Sierra |
So moral of this story = go EFI.
|
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:32 am ] |
| Post subject: | Re: 1.6 tank in Sierra |
O ok thanks |
|
| Author: | Fatzook [ Mon Jun 20, 2011 9:39 am ] |
| Post subject: | Re: 1.6 tank in Sierra |
Benny the LWB tank is physically too large to fit between the rails and behind the diff. You would need to do ALOT of fab work to get it in there, and for a 15L gain in capacity its just not worth the effort. If you had a LWB sierra it would be heaps easier. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|