body lift on what.... your mum's washing machine?
sierra or vitara, both have chassis mounted radiators.
| auszookers.com https://auszookers.com/forum/ |
|
| Body lift Q's https://auszookers.com/forum/viewtopic.php?f=5&t=23070 |
Page 1 of 1 |
| Author: | Bennyzarb [ Mon Jun 20, 2011 8:45 am ] |
| Post subject: | Body lift Q's |
Hi I am just wondering do I need to drop my radiator or cut anything out of the shroud when I do a body lift and is there anything elce you need to do when you do a body lift |
|
| Author: | atari4x4 [ Mon Jun 20, 2011 8:47 am ] |
| Post subject: | Re: Body lift Q's |
body lift on what.... your mum's washing machine?
sierra or vitara, both have chassis mounted radiators. |
|
| Author: | ellis [ Mon Jun 20, 2011 8:58 am ] |
| Post subject: | Re: Body lift Q's |
sierra probs and as said above has chassis mounted rad so no and just watch ur brakeline's when jacking up to fit blocks in |
|
| Author: | ellis [ Mon Jun 20, 2011 9:04 am ] |
| Post subject: | Re: Body lift Q's |
and when putting block's in put wood or something between body and chass so ur hands dont get crushed |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:04 am ] |
| Post subject: | Re: Body lift Q's |
O ok what will happen with the brake lines will I need to extend them |
|
| Author: | zooky08 [ Mon Jun 20, 2011 9:07 am ] |
| Post subject: | Re: Body lift Q's |
Read the instructions
|
|
| Author: | ellis [ Mon Jun 20, 2011 9:08 am ] |
| Post subject: | Re: Body lift Q's |
idk im guessing u got a leafy. Probs not but on my coily i undid the brakes the 1st time but when i tock it of and put the lift back on the 2nd time i just jacked it up with the brake still done up and they just steached for that little bit till i let it back down onto the blocks |
|
| Author: | boostedbrick [ Mon Jun 20, 2011 9:13 am ] |
| Post subject: | Re: Body lift Q's |
Brake lines should be attached below your chassis.. Bodylift isnt an issue.. |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:14 am ] |
| Post subject: | Re: Body lift Q's |
Yea mine is a 92 Sierra 31s 2 in lifted ome springs snake racing extended shackles have made the body lift myself out of 50mm by 50mm round solid steel with high tensile bolts and a 6mm solid steel spacer for steering |
|
| Author: | shep [ Mon Jun 20, 2011 9:16 am ] |
| Post subject: | Re: Body lift Q's |
so what are you going to do with the body studs? |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:18 am ] |
| Post subject: | Re: Body lift Q's |
O good thanks how do I get the old bolts out I had a look today and the bolt doesn't go through the floor when I jack it will up will they just come out and what size are the bolts and how long will they need to be for the body lift |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:19 am ] |
| Post subject: | Re: Body lift Q's |
O shit are they welded in I think about that dam |
|
| Author: | steak_knife [ Mon Jun 20, 2011 9:19 am ] |
| Post subject: | Re: Body lift Q's |
http://auszookers.com/index.php?name=Fo ... ic&t=15518 
|
|
| Author: | shep [ Mon Jun 20, 2011 9:19 am ] |
| Post subject: | Re: Body lift Q's |
they are studs and dont come out. buy a just cruzing kit as it has the bits ya need. |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:20 am ] |
| Post subject: | Re: Body lift Q's |
O well I will just take them out and put bolts in |
|
| Author: | boostedbrick [ Mon Jun 20, 2011 9:20 am ] |
| Post subject: | Re: Body lift Q's |
You could cut some holes in the floor, remove studs. Add bolts, do them up and weld your floor back together. Thats what someone did on mine.. But would be somewhat dodgy, and stupid. And makes removing the body an angle grinder job |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:22 am ] |
| Post subject: | Re: Body lift Q's |
O ok will buy them then I will use the Blocks for a transfer lift |
|
| Author: | Gwagensteve [ Mon Jun 20, 2011 9:25 am ] |
| Post subject: | Re: Body lift Q's |
Bennyzarb wrote: O well I will just take them out and put bolts in
And deal with a cracked floor down the track... Socket bolts are the answer. Cutting out the stock captive bolts is a pain, and the end result is more stress on the floor. Just get the Just Cruzin kit. It's high quality and will last for years. Steve. |
|
| Author: | Bennyzarb [ Mon Jun 20, 2011 9:30 am ] |
| Post subject: | Re: Body lift Q's |
Ok will do that can I use the blocks I made on the transfer lift |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|