This is the smaller one. I figured the larger one would look too dicky on a 'small' 4WD. And this size is just fine for mine.
| auszookers.com https://auszookers.com/forum/ |
|
| clarke rubber flairs https://auszookers.com/forum/viewtopic.php?f=5&t=23095 |
Page 1 of 2 |
| Author: | jonno_racing [ Tue Jun 21, 2011 4:24 am ] |
| Post subject: | clarke rubber flairs |
any one sceen these? its a full rubber flair it looks to be a little widder than a wide track? and around the same shape. kind of hard to descripe. and cant find on there websight. its $34 a mtr. so i think about $200 would cover the car. i like the look of it 2. |
|
| Author: | stockman [ Tue Jun 21, 2011 4:54 am ] |
| Post subject: | Re: clarke rubber flairs |
Yep, it's good stuff too! |
|
| Author: | TryHard [ Tue Jun 21, 2011 5:08 am ] |
| Post subject: | Re: clarke rubber flairs |
iv got some on my zook atm spend like 160 on the stuff its slightly different to the ones most people get it lays bascily flat on the car and flares out i havnt fitted it the best haha .. but yer .. i got 5 meters |
|
| Author: | suzooky87 [ Tue Jun 21, 2011 7:23 am ] |
| Post subject: | Re: clarke rubber flairs |
anyone got a pic? |
|
| Author: | zooky08 [ Tue Jun 21, 2011 7:26 am ] |
| Post subject: | Re: clarke rubber flairs |
I got the rubber flare what try hard is talking about Has a L shape on the end so it can sit flat on the side nd bottom of the flare also u can slide wire into it to shape it. $70 did four flares Got it from bunnings |
|
| Author: | buzbox [ Tue Jun 21, 2011 7:28 am ] |
| Post subject: | Re: clarke rubber flairs |
This is the smaller one. I figured the larger one would look too dicky on a 'small' 4WD. And this size is just fine for mine.
|
|
| Author: | atari4x4 [ Tue Jun 21, 2011 7:29 am ] |
| Post subject: | Re: clarke rubber flairs |
WTF, bunnings now sell rubber flare material? |
|
| Author: | buzbox [ Tue Jun 21, 2011 7:31 am ] |
| Post subject: | Re: clarke rubber flairs |
Alot of people refer garden edging as "bunnings flares". IMO Cheap and nasty, but effective. EDIT: I'm not sure if that's what zooky has. |
|
| Author: | TryHard [ Tue Jun 21, 2011 7:34 am ] |
| Post subject: | Re: clarke rubber flairs |
zooky08 wrote: I got the rubber flare what try hard is talking about
Has a L shape on the end so it can sit flat on the side nd bottom of the flare also u can slide wire into it to shape it. $70 did four flares Got it from bunnings ya thats the stuff .. 70 $ :O and from bunnings  info please haha
|
|
| Author: | zooky08 [ Tue Jun 21, 2011 7:39 am ] |
| Post subject: | Re: clarke rubber flairs |
Considering it's from bunning I would say it would be some kind of cheap garden edging Does the job nd it sits flat against the car/flare |
|
| Author: | Rusho [ Tue Jun 21, 2011 8:17 am ] |
| Post subject: | Re: clarke rubber flairs |
THIS could be worth a shot also Jonno |
|
| Author: | TryHard [ Tue Jun 21, 2011 8:32 am ] |
| Post subject: | Re: clarke rubber flairs |
Rusho wrote: THIS could be worth a shot also Jonno
you can get that from clark ruber not sure on price diff i found it wasnt wide enuf for me |
|
| Author: | ZookiMonsta [ Tue Jun 21, 2011 9:06 am ] |
| Post subject: | Re: clarke rubber flairs |
The stuff clarke rubber sell is pretty much the same as the 'Bush Ranger' rubber flares that Autobarn etc just a lot cheaper. |
|
| Author: | SSSIERA [ Tue Jun 21, 2011 11:07 am ] |
| Post subject: | Re: clarke rubber flairs |
BUNNINGS FLARES |
|
| Author: | jonno_racing [ Tue Jun 21, 2011 11:27 am ] |
| Post subject: | Re: clarke rubber flairs |
the stuff i am talking about is 100% different. it literally looks like a original suzuki flare but in rubber! i will grab a pic of it tomrow if i can. i think its 50mm wide! |
|
| Author: | 2stroker [ Tue Jun 21, 2011 11:47 am ] |
| Post subject: | Re: clarke rubber flairs |
jonno_racing wrote: the stuff i am talking about is 100% different. it literally looks like a original suzuki flare but in rubber!
i will grab a pic of it tomrow if i can. i think its 50mm wide! Where did you see it? the only stuff that Clark Rubber sells is the stuff pictured in 35mm or 50mm, it also has a couple of different mounting profiles, flat or to the guard lip. I have never seen those garden edge bunnings flares look any good they are ugly plastic crap and alway look rough as guts. You may as well cut up a plastic rubbish bin and screw that on. |
|
| Author: | jonno_racing [ Tue Jun 21, 2011 11:50 am ] |
| Post subject: | Re: clarke rubber flairs |
clarke rubber in port mac, it has a lip that would easly attach to the side of a sierra. |
|
| Author: | jonno_racing [ Tue Jun 21, 2011 11:52 am ] |
| Post subject: | Re: clarke rubber flairs |
this isnt a flare extension but a whole new flare! just thought i might clear that up |
|
| Author: | CompTruck [ Tue Jun 21, 2011 11:52 am ] |
| Post subject: | Re: clarke rubber flairs |
anyone got pics of bunnings flares? |
|
| Author: | zooky08 [ Tue Jun 21, 2011 11:53 am ] |
| Post subject: | Re: clarke rubber flairs |
Is it the flares ajsr or tanshi run |
|
| Author: | woo603 [ Tue Jun 21, 2011 11:53 am ] |
| Post subject: | Re: clarke rubber flairs |
yeah i run them on my vit |
|
| Author: | atari4x4 [ Tue Jun 21, 2011 11:55 am ] |
| Post subject: | Re: clarke rubber flairs |
woo603 wrote: yeah i run them on my vit
what do you run? the double black flares, bunnings garden edging or the clarke rubber flares that come in 50mm or 75mm? |
|
| Author: | jonno_racing [ Tue Jun 21, 2011 11:57 am ] |
| Post subject: | Re: clarke rubber flairs |
ajsr and tanshi run double blacks these are difrent, not as wide. |
|
| Author: | zooky08 [ Tue Jun 21, 2011 11:59 am ] |
| Post subject: | Re: clarke rubber flairs |
2stroker wrote: ugly plastic crap they are actually rubbber not plastic
They look exsact like pictured above |
|
| Author: | woo603 [ Tue Jun 21, 2011 12:02 pm ] |
| Post subject: | Re: clarke rubber flairs |
bunnings garden edging its not pretty i will admit that it was only a cheap temp fix until i can afford proper ones |
|
| Author: | atari4x4 [ Tue Jun 21, 2011 12:04 pm ] |
| Post subject: | Re: clarke rubber flairs |
zooky08 wrote: 2stroker wrote: ugly plastic crap they are actually rubbber not plastic They look exsact like pictured above how can you say that? the rubber ones clearly have a profile/shape the garden edging is flat with a slight outer bead/edge. |
|
| Author: | CompTruck [ Tue Jun 21, 2011 12:04 pm ] |
| Post subject: | Re: clarke rubber flairs |
im gunna do bunnings flares on mine. just googled "bunnings 4wd flares" couple of ok ones lol |
|
| Author: | zooky08 [ Tue Jun 21, 2011 12:08 pm ] |
| Post subject: | Re: clarke rubber flairs |
atari4x4 wrote: zooky08 wrote: 2stroker wrote: ugly plastic crap they are actually rubbber not plastic They look exsact like pictured above how can you say that? the rubber ones clearly have a profile/shape the garden edging is flat with a slight outer bead/edge. If I could find a pic then I would show you |
|
| Author: | atari4x4 [ Tue Jun 21, 2011 12:15 pm ] |
| Post subject: | Re: clarke rubber flairs |
zooky08 wrote: atari4x4 wrote: zooky08 wrote: 2stroker wrote: ugly plastic crap they are actually rubbber not plastic They look exsact like pictured above how can you say that? the rubber ones clearly have a profile/shape the garden edging is flat with a slight outer bead/edge. If I could find a pic then I would show you looks pretty flat to me. bunnings garden edging 
75mm clarke rubber flare 
profile of 75mm flare 
FFS, how can you say they are the same, even blind freddy can tell the difference. |
|
| Author: | foolsp33d [ Tue Jun 21, 2011 12:15 pm ] |
| Post subject: | Re: clarke rubber flairs |
hey johnno.. is it the same contour etc as what Bogfrog used in this thread?? http://auszookers.com/index.php?name=Fo ... c&p=165533 |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|