-25 15x7's will be fine for a 30x9.5. 15x8's are not required. You may have to fit some bump stop spacers if you get scrubbing, but thats childs play.
| auszookers.com https://auszookers.com/forum/ |
|
| Wheel offset question https://auszookers.com/forum/viewtopic.php?f=5&t=23122 |
Page 1 of 1 |
| Author: | DomGat [ Wed Jun 22, 2011 3:49 am ] |
| Post subject: | Wheel offset question |
Excuse me in advance for knowing nothing about wheels & tyres. Would anyone know if a wheel in the size 15x8 with a -19 offset is going to cause big scrubbing problems for a raised sierra coily (50mm body/40mm springs) when fitted with 30x9.5 15s? Would I be better off getting wheels in 15x7? Would I be better off with a -25 offset? Might get em from the U.S, but if I get the wrong size it would be a small disaster. |
|
| Author: | Fatzook [ Wed Jun 22, 2011 3:53 am ] |
| Post subject: | Re: Wheel offset question |
-25 15x7's will be fine for a 30x9.5. 15x8's are not required. You may have to fit some bump stop spacers if you get scrubbing, but thats childs play.
|
|
| Author: | DomGat [ Wed Jun 22, 2011 7:08 am ] |
| Post subject: | Re: Wheel offset question |
What if the wheels I really wanted only came in -19 & 15x8, would that be no big deal to get them even though they are not ideal? They are very b-ling but thats the only size in suzi stud pattern. Or I should go 15x7 with -25 cause that is better suited to the car & tyre? If 15x7 is a must i'll just get sunnys. Where is the best place to get sunnys in Sydney? |
|
| Author: | denty802 [ Wed Jun 22, 2011 7:14 am ] |
| Post subject: | Re: Wheel offset question |
i have 31 x 10.5s with 15 x 8 rims on a inch offset mine scrubbed on the bumper which i have now taken off and a little at the back end which has been beaten in, with 30's you should be fine man, and i cant see 15 x 8's being a problem, especially if you plan on going bigger tyres in the future jesse |
|
| Author: | shep [ Wed Jun 22, 2011 7:19 am ] |
| Post subject: | Re: Wheel offset question |
i don't think that a 9.5 inch wide tyre would be all that good on a 8 inch wide tyre. |
|
| Author: | taszook [ Wed Jun 22, 2011 7:27 am ] |
| Post subject: | Re: Wheel offset question |
wouldnt you need more than -19 on a 8" rim to clear the chassis? maybe not on a coily |
|
| Author: | SierraDan [ Wed Jun 22, 2011 7:47 am ] |
| Post subject: | Re: Wheel offset question |
7" would be betterer for 9.5" tyres. I have 31x10.5 on an 8" rim with -23 offset and my tyres touch the spring by a bee's dick if im really having a go. |
|
| Author: | DomGat [ Wed Jun 22, 2011 10:29 am ] |
| Post subject: | Re: Wheel offset question |
If I was to want to put a 31x10.5 on instead of a 30x9.5 would it still fit 15x7 with -38? Rock crawlers might be a lot easier than importing. Desert rats look ok too, but there is no sizes in 15x7. |
|
| Author: | SierraDan [ Wed Jun 22, 2011 10:32 am ] |
| Post subject: | Re: Wheel offset question |
Alien has 31's on 15x7 -38 i believe. |
|
| Author: | DomGat [ Wed Jun 22, 2011 10:49 am ] |
| Post subject: | Re: Wheel offset question |
If that is the wheels mentioned in the post I read from July last year then I think I've worked it out. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|