| auszookers.com https://auszookers.com/forum/ |
|
| V6 transfer case https://auszookers.com/forum/viewtopic.php?f=5&t=23158 |
Page 1 of 1 |
| Author: | Mick70b [ Thu Jun 23, 2011 2:26 am ] |
| Post subject: | V6 transfer case |
Hi all, looks like i need a rebuild kit put through my transfer case, (just got quoted $395  for the kit alone), or a 2nd hand one if I can get a good one!
My question is, is the transfer case off a '97 2.0Lt V6 compatible with the 2.5 and 2.7 V6 ?? Just wondering as it may make finding a replacement easier ... hopefully! |
|
| Author: | Mick70b [ Thu Jun 23, 2011 10:28 am ] |
| Post subject: | Re: V6 transfer case |
Anyone, anyone ... Bueller, bueller! |
|
| Author: | atari4x4 [ Thu Jun 23, 2011 10:32 am ] |
| Post subject: | Re: V6 transfer case |
nope, i'm pretty sure they're different. but i think they are the same as the later 1.6 transfercases. Tombutt just did the swap with a 1.6l case that had transfer gears... maybe he might off load his old one? |
|
| Author: | Taylor74 [ Thu Jun 23, 2011 11:00 am ] |
| Post subject: | Re: V6 transfer case |
I know you can use a SV620 manual transfer on a SQ625 auto but not manual. 2.7 all different. only the type 1 2.5 auto transfer will fit but stay away from them, they are trouble, big trouble unless they have had the modified 4x4 hub selector fitted to them |
|
| Author: | tombutt [ Thu Jun 23, 2011 11:12 am ] |
| Post subject: | Re: V6 transfer case |
1.6 case will fit but speedo reads wrong as far as i can tell from driving gearing is still the same just speedo is differnt am going to look into changing the speed parts over when i have some time and sorry cant off load the case its already spoken for by a mate |
|
| Author: | Mick70b [ Fri Jun 24, 2011 8:53 am ] |
| Post subject: | Re: V6 transfer case |
No worries, thanks for the info guys. |
|
| Author: | joeblow [ Fri Jun 24, 2011 10:16 am ] |
| Post subject: | Re: V6 transfer case |
tombutt wrote: 1.6 case will fit but speedo reads wrong as far as i can tell from driving gearing is still the same just speedo is differnt am going to look into changing the speed parts over when i have some time
and sorry cant off load the case its already spoken for by a mate Be carefull there......most V6 cases have a coarse output spline. |
|
| Author: | Mick70b [ Sat Jun 25, 2011 9:27 am ] |
| Post subject: | Re: V6 transfer case |
Ah okay, thanks Joe 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|