| auszookers.com https://auszookers.com/forum/ |
|
| Vitara to sierra oil pickup https://auszookers.com/forum/viewtopic.php?f=5&t=23508 |
Page 1 of 1 |
| Author: | reeceh [ Sun Jul 03, 2011 5:48 am ] |
| Post subject: | Vitara to sierra oil pickup |
Im chasing someone that can mod my vitara oil pickup with the sierra one. Is there someone in brisbane preferably near tarragind that can do this for me. There will be payment wether it is rum or beers or watever. I was hoping the plumber at work could do it for me but they wont be on site for awhile. Cheers reece |
|
| Author: | reeceh [ Sun Jul 03, 2011 10:30 pm ] |
| Post subject: | Re: Vitara to sierra oil pickup |
anyone ?? I wana try and get the engine this weekend. Could even take it to a radiator shop and get it welded/braised |
|
| Author: | steak_knife [ Mon Jul 04, 2011 8:40 am ] |
| Post subject: | Re: Vitara to sierra oil pickup |
reeceh wrote: anyone ?? I wana try and get the engine this weekend. Could even take it to a radiator shop and get it welded/braised
good thinking..... I only have a mig, or i would of offered... |
|
| Author: | Taylor74 [ Mon Jul 04, 2011 10:16 am ] |
| Post subject: | Re: Vitara to sierra oil pickup |
You can get a sleve that goes onto the pickup to make it the correct size for the block, then all you have to do is shorten the brace bracket to the cap, can use a mig for that. |
|
| Author: | reeceh [ Mon Jul 04, 2011 11:26 am ] |
| Post subject: | Re: Vitara to sierra oil pickup |
All good I've got a mate that can do it. I'll just copy the photos from the g16b tech thread! Weld the 1.6 end onto the 1.3 pickup and also the little bracket. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|