On a stock Suzy, Im trying to get a measurement from the bottom of the bumpstop to the top of the diff.. Both front and rear..Can anyone help??
Im trying to see if my spring combo has lifted suzy from stock...
Thanks
| auszookers.com https://auszookers.com/forum/ |
|
| Bumpstop to diff mm? https://auszookers.com/forum/viewtopic.php?f=5&t=2375 |
Page 1 of 1 |
| Author: | BlueSuzy [ Sat Jun 28, 2008 2:13 am ] |
| Post subject: | Bumpstop to diff mm? |
On a stock Suzy, Im trying to get a measurement from the bottom of the bumpstop to the top of the diff.. Both front and rear..Can anyone help??
Im trying to see if my spring combo has lifted suzy from stock... Thanks
|
|
| Author: | Brett [ Sat Jun 28, 2008 12:41 pm ] |
| Post subject: | Re: Bumpstop to diff mm? |
just went out and had a look (bloody cold). 55mm front and 60 mm back from the bottom of the bump stop to the top of the diff but they are the std springs from new i'd say so would of sagged a bit. what is the car sitting at? |
|
| Author: | BlueSuzy [ Sat Jun 28, 2008 2:46 pm ] |
| Post subject: | Re: Bumpstop to diff mm? |
Ah yes cold in canberra, Cold ere too! Will be down there in 2 weeks! Back to topic* Lh side Rh side Front-65 Front-55 Rear-60 Rear-60 So if i swapped the front spring sides it will probably level out with me driving... |
|
| Author: | Mike [ Sat Jun 28, 2008 7:55 pm ] |
| Post subject: | Re: Bumpstop to diff mm? |
i thought mine was standard but its a bit higher
front 80mm rear 90mm |
|
| Author: | Hybrid [ Sat Jun 28, 2008 10:01 pm ] |
| Post subject: | Re: Bumpstop to diff mm? |
BlueSuzy wrote: Lh side Rh side Front-65 Front-55 Rear-60 Rear-60 If Bretts measure of standard height is right that means your running 33s with only a 2 inch body lift and some shackles clearing them. That can't be right.
|
|
| Author: | BlueSuzy [ Sat Jun 28, 2008 11:36 pm ] |
| Post subject: | Re: Bumpstop to diff mm? |
2" bl and 33"s (really 32's) Stock ride height in springs and shackles, stock bumps!! Major front guard(front lip)scrubbage due to diff far too forward, and springs too soft which makes it bottom out over the slightest divot in the dirt, Beautiful on road.. Working that out.. |
|
| Author: | Brett [ Sun Jun 29, 2008 1:14 am ] |
| Post subject: | Re: Bumpstop to diff mm? |
the car i look at is 100% stock. bluesuzy should clear his wheels with a body lift because he has moved his front diff forward and his rear diff back if i remember right? how does the set up flex? how many mm between the diff and bumpstop when flexed? |
|
| Author: | BlueSuzy [ Sun Jun 29, 2008 3:33 am ] |
| Post subject: | Re: Bumpstop to diff mm? |
im yet to test (measure)flex on flat dropouts, Rampups are no good.
+ i need flex with no scrubbing...Scrubbing will be reducing my flex 
|
|
| Author: | Damo [ Sun Jun 29, 2008 12:48 pm ] |
| Post subject: | Re: Bumpstop to diff mm? |
Hybrid wrote: BlueSuzy wrote: Lh side Rh side Front-65 Front-55 Rear-60 Rear-60 If Bretts measure of standard height is right that means your running 33s with only a 2 inch body lift and some shackles clearing them. That can't be right. It might be, he said they only measure 32". Mine measure 31" and I have only 2" springs, no bodylift, no shackle lift. I'm not surprised he is having problems with tyre rub though, mine does the same thing when crossed up. A little grinder love and it'd be all good. |
|
| Author: | burls [ Sun May 23, 2010 6:28 am ] |
| Post subject: | Re: Bumpstop to diff mm? |
can anyone tell me what is the bump stop measurements should be or are with a 2 inch suspension lift |
|
| Author: | BlueSuzy [ Sun May 23, 2010 6:49 am ] |
| Post subject: | Re: Bumpstop to diff mm? |
Try adding 50mm/2" from Brett' s measurements? |
|
| Author: | burls [ Sun May 23, 2010 7:45 am ] |
| Post subject: | Re: Bumpstop to diff mm? |
Yeah I could of done that, But unless Brett's is with new springs it will not be a true measurement. Has anyone who has done a spring lift and measured this? |
|
| Author: | BlueSuzy [ Sun May 23, 2010 8:15 am ] |
| Post subject: | Re: Bumpstop to diff mm? |
No one is going to have a definate mm. As there is too many differences! Different Makes of 2" Springs Different Ages Different Conditions So if its over 100mm. She's lifted 2" If your front springs are flat, Thats standard. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|