[ntech]

Hi guys , new member , i just bourght a 98 coily , i want to lift the suspension and put bigger whells or tyres can - i need information on where to buy suspension kit , how high to go , where can i buy wheels and tyres ?
any info at this stage ?/ what is a good highest with out going to crazy !! i want it to still drive on the road thnks nick

[stockman]

Personally I'd do a two inch body lift and put some 30's or 31's on it.
I did a 2" spring lift in my coily and it was a horrible ride. So hard.
That was a exspensive kit recommended by a Suzuki workshop, I'd hate to think how the cheap kits ride.

[ellis]

i had a ebay 1 in my last car and it was a pree good ride

[MacDaddy]

You can get some good lift kits off ebay for $600 to $1000... just ask, and make sure you get the right spring/load rate for your zook, otherwise it will be too soft, or too stiff... take accessories into account, and any bar work...

[ntech]

ok so if i go 2 ' body lift and 31 !!! would the tyres rub ?? so no lift no the suspension is that the go ?? I want good gear ?? thanks for the info guys !!!!

[SierraDan]

it shouldnt no. if it does very lightly.
BUT if youre going with 31's do you have reduction gears? otherwise dont bother.

[ZookFan]

SierraDan wrote:

it shouldnt no. if it does very lightly.
BUT if youre going with 31's do you have reduction gears? otherwise dont bother.

Yeah I agree, or it will be slow as and lack torque offroad

[got_bar_work]

I had 30 mm kings and ultima shocks on my coily and it rode nice and could hold up some camping gear
I just cut my guards to run 31 and put in a wt tc with 4.1
It was very stable and out drove a lot of bigger cars because it could take lines that were on stupid angles with out feeling tippy
Wat I lacked in traction I made up with right boot which is bad but worked and never busted any cv or axels
Watch the panhard rods they bend so easy
And never put in nylong bushes the arms bend before the bush does