| auszookers.com https://auszookers.com/forum/ |
|
| G16b crank angle sensor wire colours https://auszookers.com/forum/viewtopic.php?f=5&t=23877 |
Page 1 of 1 |
| Author: | dp87 [ Fri Jul 15, 2011 8:04 am ] |
| Post subject: | G16b crank angle sensor wire colours |
hey guys. i got back my crank angle sensor plug back from the auto electircian. i had to get it rewired as there were no wires in it when i bought the engine. all i need to do is wire it into the loom. heres are the wires from the loom. im guessing these are for the cas as i have connected up all the other plugs on the loom. one is black, the other is yellow (might be white but could be dirty http://img571.imageshack.us/img571/6316/img0805j.jpg what i need to know what way to connect the 2 wires to the plug What wire goes closest to the hole for the bolt in the sensor? (when the plug is connected into the sensor?) cheers, dan |
|
| Author: | steak_knife [ Sat Jul 16, 2011 3:24 am ] |
| Post subject: | Re: G16b crank angle sensor wire colours |
http://www.ptjau.com/images/sierra/bale ... ringv1.pdf This help??? |
|
| Author: | steak_knife [ Sat Jul 16, 2011 3:26 am ] |
| Post subject: | Re: G16b crank angle sensor wire colours |
dp87 wrote: hey guys. i got back my crank angle sensor plug back from the auto electircian. i had to get it rewired as there were no wires in it when i bought the engine.
all i need to do is wire it into the loom. heres are the wires from the loom. im guessing these are for the cas as i have connected up all the other plugs on the loom. one is black, the other is yellow (might be white but could be dirty http://img571.imageshack.us/img571/6316/img0805j.jpg what i need to know what way to connect the 2 wires to the plug What wire goes closest to the hole for the bolt in the sensor? (when the plug is connected into the sensor?) cheers, dan Looking at the diag it doesn't matter |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
