still nothing
where am i supposed to be getting power?
| auszookers.com https://auszookers.com/forum/ |
|
| 8 valve swift tbi on sierra...no cas pulse https://auszookers.com/forum/viewtopic.php?f=5&t=23902 |
Page 1 of 1 |
| Author: | 93zook [ Sat Jul 16, 2011 4:45 am ] |
| Post subject: | 8 valve swift tbi on sierra...no cas pulse |
hey guys. trying to put some fuel injection on the sierra and having troubles with not getting any fuel to squirt out. the pump will prime when power is givin but wont run when cranking. ive done the dizzy mod and is connected properly. any one got any ideas? ive had a read through this http://www.auszookers.com/index.php?nam ... hlight=tbi but still not happening. cheers |
|
| Author: | bails [ Sat Jul 16, 2011 7:47 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no fuel and no spark?? |
is the dizzy earthed? this will stop the fuel as well. or the tacho wire connected to the ecu(mine was a brown wire)? this is what was stoping mine. |
|
| Author: | 93zook [ Sat Jul 16, 2011 8:01 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no fuel and no spark?? |
no brown wire with mine but dizzy is not earthed...will try it now |
|
| Author: | 93zook [ Sat Jul 16, 2011 8:16 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no fuel and no spark?? |
how did you earth yours? |
|
| Author: | bails [ Sat Jul 16, 2011 8:59 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no fuel and no spark?? |
just tap off from the black wire from your dizzy |
|
| Author: | 93zook [ Sat Jul 16, 2011 9:33 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no fuel and no spark?? |
still nothing where am i supposed to be getting power?
|
|
| Author: | 93zook [ Sat Jul 16, 2011 9:50 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no fuel and no spark?? |
having a srearch on the net i may have found my solution. when i got everything the igniter didn't come with a plug so i had no idea where the wires went. i looked on the wiring diagram and solderd wires on to where i thought they were ment to go. but i may be wrong. does anyone know what wires are supposed to go where? cheers. |
|
| Author: | 93zook [ Sun Jul 17, 2011 8:26 am ] |
| Post subject: | Re: 8 valve swift tbi on sierra...no cas pulse |
still not going. pretty sure ive ot everything plugged into where it needs to be but when i put a multi meter on the cas and crank it i get nothing. ive removed the black box and pluged the wires strait into the CAS wires for the ecm. is there anything im missing? 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|