| auszookers.com https://auszookers.com/forum/ |
|
| gearing set for a '90 sierra with 30x9.5 on them https://auszookers.com/forum/viewtopic.php?f=5&t=24003 |
Page 1 of 1 |
| Author: | samuraighost [ Tue Jul 19, 2011 3:30 am ] |
| Post subject: | gearing set for a '90 sierra with 30x9.5 on them |
hey guys i can get my hands on a set of 4.8 or 4.9 gears for my sierra for a really cheap price brand new. was wondering if it is worth the job with the tyres im running?? will i get better pull on the car?? would it be a big job to put it in?? how long would it take?? the zook still has its stock transfer case. would love all the help i can get as this is the first time i am going to rebuild the case if its worth the job 
|
|
| Author: | JrZook [ Tue Jul 19, 2011 3:51 am ] |
| Post subject: | Re: gearing set for a '90 sierra with 30x9.5 on them |
Assume your talking about 4.9:1 tcase gears into a leafy sierra tcase. If you have never experienced running tcase reduction gears this will total transform your ride both on/off the road with your 30's. Installation can be a little tricky, as I recall you may have to press off some bearings and replace them. Apart from that its fairly straight forward and there are instructions on the net. Dan |
|
| Author: | taszook [ Tue Jul 19, 2011 7:10 am ] |
| Post subject: | Re: gearing set for a '90 sierra with 30x9.5 on them |
took me and a mate 4 hours with no idea what we were doing, just following the instructions and doing it as it said. we didnt have a bearing puller or press but it would make it a lot easier. i run 30's and put 6.5's in. think it works well with the 1.3 and what is really cheap? buying locally is really expensive. check lowrangeoffroad.com if you havent already |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|