auszookers.com
https://auszookers.com/forum/

Fitting extractors
https://auszookers.com/forum/viewtopic.php?f=5&t=24042		 Page 1 of 1
Author:  zukmeista [ Wed Jul 20, 2011 2:51 am ]
Post subject:  Fitting extractors
Going to be getting some extractors and want to know if there are any special things you need to do when fitting apart from a new gasket. They are going on a sierra with a G13A.
Author:  hooki [ Wed Jul 20, 2011 2:54 am ]
Post subject:  Re: Fitting extractors
always use washers on the stud bolts other wise you risk stripping the thread in the head.
Author:  ando_zook94 [ Wed Jul 20, 2011 5:09 am ]
Post subject:  Re: Fitting extractors
$40 at an exhaust place.
how much i got qouted..
Author:  shakes [ Wed Jul 20, 2011 5:31 am ]
Post subject:  Re: Fitting extractors
ando_zook94 wrote:
$40 at an exhaust place.
how much i got qouted..


To fit? thats just being lazy :lol:
Author:  zukmeista [ Wed Jul 20, 2011 7:03 am ]
Post subject:  Re: Fitting extractors
$40 at an exhaust place.
how much i got qouted..

And it has no use to me whatsoever... Go dribble somewhere else :roll:
Author:  Jasen [ Wed Jul 20, 2011 7:12 am ]
Post subject:  Re: Fitting extractors
You're still gonna have to take it to an exhaust shop anyways unless ur doing the welding to yourself (that $40 fitting will include the welding). Fitting them to the head is a piece of piss. Just fitted some to mine last weekend and i'll agree with Hooki here - definitely use some washers when fitting. I had to purely because the flange holes on the extractors i got were 12mm holes while the studs are 6mm(?).
Author:  zukmeista [ Wed Jul 20, 2011 7:20 am ]
Post subject:  Re: Fitting extractors
Welding?
Author:  Jasen [ Wed Jul 20, 2011 7:23 am ]
Post subject:  Re: Fitting extractors
zukmeista wrote:
Welding?


As in welding the extractor outlet to ur existing system.
Author:  boostedbrick [ Wed Jul 20, 2011 7:23 am ]
Post subject:  Re: Fitting extractors
How you planning on attaching the rest of the exhuast? or are you going hektik bare headers? or dodgy clamps?

If you need to ask if there is anything special to undoing doing some nuts, replacing a part and doing nuts back up, maybe you haven't thought the rest of the process through.
Author:  zooky08 [ Wed Jul 20, 2011 7:39 am ]
Post subject:  Re: Fitting extractors
most extractors you have to either weld to existing exhaust or weld on a flange :helloo:
Author:  Jasen [ Wed Jul 20, 2011 8:01 am ]
Post subject:  Re: Fitting extractors
You need to remove this to fit em too

Side note: That pipe looks to be a decent size - untill you cut thru it and realize it's bloody double pipe with the inner being barely 1 1/4" :evil:

Image
Author:  SuziBlu [ Wed Jul 20, 2011 9:41 am ]
Post subject:  Re: Fitting extractors
hooki wrote:
always use washers on the stud bolts other wise you risk stripping the thread in the head.


Say what.

Please explain.
Author:  TZAR [ Wed Jul 20, 2011 9:52 am ]
Post subject:  Re: Fitting extractors
zukmeista wrote:
$40 at an exhaust place.
how much i got qouted..

And it has no use to me whatsoever... Go dribble somewhere else :roll:



mr happy arent you
Author:  zukmeista [ Wed Jul 20, 2011 3:01 pm ]
Post subject:  Re: Fitting extractors
Comes with 2" system, all for $30 8)
Author:  hooki [ Wed Jul 20, 2011 3:29 pm ]
Post subject:  Re: Fitting extractors
SuziBlu wrote:
hooki wrote:
always use washers on the stud bolts other wise you risk stripping the thread in the head.


Say what.

Please explain.


This is what i was told by my exhaust guy that did my system last week. He didn't fully explain it to me but i trust him as he's been doing it for 20+ years.

I think it had something to do with the new wildcat extractors that i got as they have a rather large tolerance in the holes for the exhaust studs.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/