| auszookers.com https://auszookers.com/forum/ |
|
| A RUF nightmare!!!! https://auszookers.com/forum/viewtopic.php?f=5&t=24067 |
Page 1 of 1 |
| Author: | AxL_ [ Wed Jul 20, 2011 12:08 pm ] |
| Post subject: | A RUF nightmare!!!! |
im about to do a ruf, i am going to buy new springs but sifting through the posts i find a lot of conflicting facts...... i need to know if i need 2" lifted rear springs up front as well as up the back or...... have 2"lifted rear and stock rear springs up front arrrrrrrrrrrrr i need help |
|
| Author: | matty_wall [ Wed Jul 20, 2011 12:09 pm ] |
| Post subject: | Re: A RUF nightmare!!!! |
standard rears in the front. lifted rears in the rear |
|
| Author: | Chop [ Wed Jul 20, 2011 12:22 pm ] |
| Post subject: | Re: A RUF nightmare!!!! |
I had lifted efs rears all round, with a RUF via redrilled spring perches. Worked well, i had a arb bar upfront. |
|
| Author: | Red89 [ Wed Jul 20, 2011 12:25 pm ] |
| Post subject: | Re: A RUF nightmare!!!! |
AxL_ wrote: im about to do a ruf, i am going to buy new springs but sifting through the posts i find a lot of conflicting facts...... i need to know if i need 2" lifted rear springs up front as well as up the back or...... have 2"lifted rear and stock rear springs up front arrrrrrrrrrrrr i need help
Depends how high you want it to end up. You can go stock rear up front with raised in the rear or 2 inch rears all round with extended shackles in the rear to bring it up to the same height as the front. |
|
| Author: | 31zook [ Wed Jul 20, 2011 6:41 pm ] |
| Post subject: | Re: A RUF nightmare!!!! |
31zook wrote: Flat rear sierra springs with drilled rear spring mounts and 50mm longer shackles will equal a 50mm lift springs in the rear.
Chassis extentions with stock rear springs and stock shackles will not give you any lift. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|