hmm ive got a photo of mine when i put body blocks in it ..before and after..ill scrounge them up but im on little litltle tyres
| auszookers.com https://auszookers.com/forum/ |
|
| 89 model vitara stock height? https://auszookers.com/forum/viewtopic.php?f=5&t=2407 |
Page 1 of 1 |
| Author: | joyride [ Thu Jul 03, 2008 2:37 pm ] |
| Post subject: | 89 model vitara stock height? |
anyone here know what the stock height (from the ground to the top of the front/rear wheel arch) is for the vitara? i;m trying to figure out if the suspension has been changed on mine... springs are black coloured and covered with crap and the shocks are tokico. is this OEM? |
|
| Author: | Fluffy [ Thu Jul 03, 2008 3:34 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
hmm ive got a photo of mine when i put body blocks in it ..before and after..ill scrounge them up but im on little litltle tyres
|
|
| Author: | bobbie88 [ Thu Jul 03, 2008 8:22 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
fluffy how did u go with the body lift, was it a pain in the ass anything u have to mod, if so how did u go about it, really interested.. cheers man |
|
| Author: | joyride [ Thu Jul 03, 2008 11:51 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
ok i just got home and measured the clearance for the front and rear tyres. the clearance between the wheel and wheel arch for front is 80mm and rear is 100mm. i have 30 inch tyres on the vit. is this still stock height? |
|
| Author: | joyride [ Fri Jul 04, 2008 12:06 am ] |
| Post subject: | Re: 89 model vitara stock height? |
pics of suspension.. looks oem to me but could be mistaken. you can barely make out 'TOKICO' on the shocks |
|
| Author: | Fluffy [ Fri Jul 04, 2008 1:13 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
i just went and took a few pics .... heres mine ...ive got 50mm spacers in ....... but check out that tyre clearance  
from lip to ground was Front 800mm so - 50mm = 750mm Rear 820mm so - 50mm = 770mm |
|
| Author: | joyride [ Fri Jul 04, 2008 1:18 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
whoa so much room. so minus the 50mm spacers, you still have the 2inch BL? i guess my height is still standard.. |
|
| Author: | Fluffy [ Fri Jul 04, 2008 1:38 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
50mm spacers is the body lift..ive only got tiny tyres at the moment i think they are 25.5 inch 
|
|
| Author: | joyride [ Fri Jul 04, 2008 4:07 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
so you havent done a suspension lift? i measured my height like how you did yours: front wheel arch to ground = 800mm rear wheel arch to ground = 830mm this height is with the 30" tyres |
|
| Author: | joeblow [ Fri Jul 04, 2008 4:12 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
guys if you want to take accurate measurements ALWAYS measure from the bottom edge of the rim to the lip of the guard, never the ground. |
|
| Author: | Fluffy [ Fri Jul 04, 2008 4:46 pm ] |
| Post subject: | Re: 89 model vitara stock height? |
joeblow wrote: guys if you want to take accurate measurements ALWAYS measure from the bottom edge of the rim to the lip of the guard, never the ground.
ahhhhhhh wise u are 
front 705mm from bottom of rim to lip rear 725mm.... thanks Joe 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|