auszookers.com
https://auszookers.com/forum/

LJ50 crank seals??
https://auszookers.com/forum/viewtopic.php?f=5&t=24076		 Page 1 of 2
Author:  BenLJ50 [ Thu Jul 21, 2011 12:31 am ]
Post subject:  LJ50 crank seals??
Has anyone had any success locating the centre crank shaft seals for a 77 LJ50??

Ive found plenty of suppliers who can reference part numbers but no one who can actually get them :x

Did actually find some OS but they weren't interested in posting them to OZ.

Ben
Author:  Bruce [ Thu Jul 21, 2011 12:40 am ]
Post subject:  Re: LJ50 crank seals??
What is the part number and I'll see what I can do.
Author:  BenLJ50 [ Thu Jul 21, 2011 1:01 am ]
Post subject:  Re: LJ50 crank seals??
Hi Bruce,

These are the numbers (robbed from another thread)

No 21: 09283-25054
No 25: 09289-44003
No 35: 12311-67010 (x2) - These are the two centre seals
No 38: 09283-35006

I need all five of the above

Cheers,

Ben
Author:  tanshi [ Thu Jul 21, 2011 1:06 am ]
Post subject:  Re: LJ50 crank seals??
These are really hard to find.

I believe we have a line on them. but might be a few weeks hearing back.

where abouts are you?
Author:  BenLJ50 [ Thu Jul 21, 2011 1:29 am ]
Post subject:  Re: LJ50 crank seals??
Hi Mate,

I'm in Sydney (Baulkham Hills)

I did find them at http://www.infodozer.com/catalogs/musas ... ker=SUZUKI, sent the guy an email and had a response saying postage was too difficult.

What do you mean by having a line on them? If anyone is expected a shipment of them, can i put my name on two?
Author:  tanshi [ Thu Jul 21, 2011 1:46 am ]
Post subject:  Re: LJ50 crank seals??
I know a guy who knows a guy who might be able to get them.

lol

have you tried, ratman on www.lj10.com he seems to be able to get them.
Author:  tonyevans [ Thu Jul 21, 2011 2:03 am ]
Post subject:  Re: LJ50 crank seals??
tanshi wrote:
I know a guy who knows a guy who might be able to get them.

lol

have you tried, ratman on www.lj10.com he seems to be able to get them.


Yes he was the only source I could find when I was looking.

Have you found someone who can do the crank pressing and set-up?
Author:  Fity [ Thu Jul 21, 2011 2:11 am ]
Post subject:  Re: LJ50 crank seals??
Ask and you will find. :)

http://www.lj10.com/forums/viewtopic.php?f=4&t=5614
Author:  BenLJ50 [ Thu Jul 21, 2011 2:14 am ]
Post subject:  Re: LJ50 crank seals??
tonyevans wrote:
tanshi wrote:
I know a guy who knows a guy who might be able to get them.

lol

have you tried, ratman on www.lj10.com he seems to be able to get them.


Yes he was the only source I could find when I was looking.

Have you found someone who can do the crank pressing and set-up?


Possibly, i was going to approach a guy i've used for motor bike cranks and re sleeves.

I'll send Ratman a message, thanks for the lead!
Author:  BenLJ50 [ Thu Jul 21, 2011 2:17 am ]
Post subject:  Re: LJ50 crank seals??
Fity wrote:
Ask and you will find. :)

http://www.lj10.com/forums/viewtopic.php?f=4&t=5614


Do you still have them available :o where can i send the money!
Author:  tanshi [ Thu Jul 21, 2011 2:18 am ]
Post subject:  Re: LJ50 crank seals??
BenLJ50 wrote:
tonyevans wrote:
tanshi wrote:
I know a guy who knows a guy who might be able to get them.

lol

have you tried, ratman on www.lj10.com he seems to be able to get them.


Yes he was the only source I could find when I was looking.

Have you found someone who can do the crank pressing and set-up?


Possibly, i was going to approach a guy i've used for motor bike cranks and re sleeves.

I'll send Ratman a message, thanks for the lead!


I have a guy up here who was going top charge me $80 dollars to do the crank rebuuild if i could find the seals.
Author:  Fity [ Thu Jul 21, 2011 2:21 am ]
Post subject:  Re: LJ50 crank seals??
BenLJ50 wrote:
Fity wrote:
Ask and you will find. :)

http://www.lj10.com/forums/viewtopic.php?f=4&t=5614


Do you still have them available :o where can i send the money!


PM sent.
Author:  tanshi [ Thu Jul 21, 2011 2:23 am ]
Post subject:  Re: LJ50 crank seals??
ME too!!!!!

if these are regularly availible, there is a dude on EBAY doing full top end rebuild kits including pistons. so we should be good for full new rebuilt engines
Author:  BenLJ50 [ Thu Jul 21, 2011 2:27 am ]
Post subject:  Re: LJ50 crank seals??
tanshi wrote:
ME too!!!!!

if these are regularly availible, there is a dude on EBAY doing full top end rebuild kits including pistons. so we should be good for full new rebuilt engines


I contacted this guy and asked if he will deal direct (Guy in Wentworthville) he said it was fine. He then sent me his 4page PDF of available bits and pieces with prices
Author:  tanshi [ Thu Jul 21, 2011 2:29 am ]
Post subject:  Re: LJ50 crank seals??
BenLJ50 wrote:
tanshi wrote:
ME too!!!!!

if these are regularly availible, there is a dude on EBAY doing full top end rebuild kits including pistons. so we should be good for full new rebuilt engines


I contacted this guy and asked if he will deal direct (Guy in Wentworthville) he said it was fine. He then sent me his 4page PDF of available bits and pieces with prices


i have been giving him crank seal and bearing part numbers. he is trying to track down suppliers.
Author:  BenLJ50 [ Thu Jul 21, 2011 2:32 am ]
Post subject:  Re: LJ50 crank seals??
Fity wrote:
BenLJ50 wrote:
Fity wrote:
Ask and you will find. :)

http://www.lj10.com/forums/viewtopic.php?f=4&t=5614


Do you still have them available :o where can i send the money!


PM sent.


PM'd returned :woohoo:
Author:  Fity [ Thu Jul 21, 2011 2:33 am ]
Post subject:  Re: LJ50 crank seals??
BenLJ50 wrote:
[

PM'd returned :woohoo:


That is how I felt after finally tracking the down. :woohoo:
Author:  Bruce [ Thu Jul 21, 2011 2:35 am ]
Post subject:  Re: LJ50 crank seals??
good and quick outcome. :-)
Author:  BenLJ50 [ Thu Jul 21, 2011 2:35 am ]
Post subject:  Re: LJ50 crank seals??
Whilst i have you guys looking, do you know why my cylinder head is different to every other LJ50 i've seen??

The face of mine is flush (externally) with "SUZUKI" cast into it, all others i've seen don't say Suzuki and have depressions where the plugs screw in?
Author:  tanshi [ Thu Jul 21, 2011 2:35 am ]
Post subject:  Re: LJ50 crank seals??
I have i think 6 50 motors in the shed, al waiting to be rebuilt, this will be a massive win if i can get these rebuilt and stored away :)
Author:  BenLJ50 [ Thu Jul 21, 2011 2:37 am ]
Post subject:  Re: LJ50 crank seals??
tanshi wrote:
I have i think 6 50 motors in the shed, al waiting to be rebuilt, this will be a massive win if i can get these rebuilt and stored away :)


Nice, very jealous!, i'm trying to track down another motor purely as a spare!
Author:  tanshi [ Thu Jul 21, 2011 2:39 am ]
Post subject:  Re: LJ50 crank seals??
BenLJ50 wrote:
Whilst i have you guys looking, do you know why my cylinder head is different to every other LJ50 i've seen??

The face of mine is flush (externally) with "SUZUKI" cast into it, all others i've seen don't say Suzuki and have depressions where the plugs screw in?


pics!

I think i have one too. one of my motors is a carry van one.
Author:  BenLJ50 [ Thu Jul 21, 2011 2:41 am ]
Post subject:  Re: LJ50 crank seals??
tanshi wrote:
BenLJ50 wrote:
Whilst i have you guys looking, do you know why my cylinder head is different to every other LJ50 i've seen??

The face of mine is flush (externally) with "SUZUKI" cast into it, all others i've seen don't say Suzuki and have depressions where the plugs screw in?


pics!

I think i have one too. one of my motors is a carry van one.


I tried before and gave up! Whats the trick?

Ill have another crack, engine number matches the compliance plate so the block is original, build date is 11/77
Author:  tanshi [ Thu Jul 21, 2011 2:44 am ]
Post subject:  Re: LJ50 crank seals??
ok, its a late model one.

Does it have the oil feeds into the cyls as well as the crank case?

some of the newer ones only had the bottom three oil feeds, i.e none direct into the cyls
Author:  BenLJ50 [ Thu Jul 21, 2011 2:46 am ]
Post subject:  Re: LJ50 crank seals??
How this?
Author:  BenLJ50 [ Thu Jul 21, 2011 2:48 am ]
Post subject:  Re: LJ50 crank seals??
tanshi wrote:
ok, its a late model one.

Does it have the oil feeds into the cyls as well as the crank case?

some of the newer ones only had the bottom three oil feeds, i.e none direct into the cyls


Got four lines off the oil pump.

1 which branches to each cylinder

then 1 line to each of the mains.
Author:  tonyevans [ Thu Jul 21, 2011 6:58 am ]
Post subject:  Re: LJ50 crank seals??
tanshi wrote:
BenLJ50 wrote:
tanshi wrote:
ME too!!!!!

if these are regularly availible, there is a dude on EBAY doing full top end rebuild kits including pistons. so we should be good for full new rebuilt engines


I contacted this guy and asked if he will deal direct (Guy in Wentworthville) he said it was fine. He then sent me his 4page PDF of available bits and pieces with prices


i have been giving him crank seal and bearing part numbers. he is trying to track down suppliers.


I think you are talking about Greg - I have got a heap of stuff from him - Very helpful guy and an LJ man himself - He tried for seals for me but had no luch but does have bearings.
Author:  303zuke [ Thu Jul 21, 2011 2:50 pm ]
Post subject:  Re: LJ50 crank seals??
BenLJ50 wrote:
Whilst i have you guys looking, do you know why my cylinder head is different to every other LJ50 i've seen??

The face of mine is flush (externally) with "SUZUKI" cast into it, all others i've seen don't say Suzuki and have depressions where the plugs screw in?


These were the late Jap Market engines discussed on Page 2 of the LJ Tech Thread
Author:  BenLJ50 [ Wed Aug 17, 2011 7:59 am ]
Post subject:  Re: LJ50 crank seals??
Hi Fity,

Here's the pics of what i've got.
Author:  Fity [ Wed Aug 17, 2011 9:52 am ]
Post subject:  Re: LJ50 crank seals??
They look correct, it may be the pics but the roll pin looks to close to the edge.
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/