| auszookers.com https://auszookers.com/forum/ |
|
| timing belt https://auszookers.com/forum/viewtopic.php?f=5&t=24143 |
Page 1 of 1 |
| Author: | Ratty562 [ Sat Jul 23, 2011 2:33 am ] |
| Post subject: | timing belt |
hi all would someone be able to tell me how to set a timing belt tensioner its for a 1.6 carby vitara thanks matt |
|
| Author: | buzbox [ Sat Jul 23, 2011 3:15 am ] |
| Post subject: | Re: timing belt |
You should see the mark left on the adjuster when you undid it, return it to that position and tighten. The belt shouldn't be overly tight and shouldn't move more than 1cm when you press down with 1 finger. Same go's for the other belts. Because new belts are stiff, you should check it after 1000km or so. |
|
| Author: | Taylor74 [ Sat Jul 23, 2011 6:33 am ] |
| Post subject: | Re: timing belt |
General rule for timing belts are on the long side of the belt you should be able to twist the belt 90 deg, if you can go further its too loose and less is too tight. |
|
| Author: | Shaggy [ Sat Jul 23, 2011 7:03 am ] |
| Post subject: | Re: timing belt |
Taylor74 is spot on with the 90 degree twist Just recently did the timing belt on my 94 Sierra and a mechanic mate said the exact same thing. Did as he advised and have had no dramas at all. Alot easier than measuring the deflection of the belt blah blah blah. Been going strong for a few months now. 
Cheers Jason. |
|
| Author: | Ratty562 [ Sat Jul 23, 2011 7:15 am ] |
| Post subject: | Re: timing belt |
thanks all for your help. got it up and running now. allmost lost the front wheel taking it for a test the nuts had worked there way allmost off matt |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|