auszookers.com
https://auszookers.com/forum/

cant change gears
https://auszookers.com/forum/viewtopic.php?f=5&t=24152		 Page 1 of 1
Author:  burls [ Sat Jul 23, 2011 6:04 am ]
Post subject:  cant change gears
well it finally stopped changing gears on the bridge, in the middle of Ipswich yesterday. It had been getting very loose in the gearshifter. Anyway got it home, took the boot off the shifter, undid the 3 bolts on the top and then the shifter just came straight out (dont think this is right). I looked at a manual but it wasnt very clear. What do I need to fix this?
Author:  laurie [ Sat Jul 23, 2011 6:24 am ]
Post subject:  Re: cant change gears
how is the shifter bush?
talk to bruce for a new one if needed
Author:  SierraDan [ Sat Jul 23, 2011 6:41 am ]
Post subject:  Re: cant change gears
It comes out pretty easy if you get it out at the right angle.
But yeah, is there a bush there?
Author:  Damo [ Sat Jul 23, 2011 6:57 am ]
Post subject:  Re: cant change gears
You might want to get yourself a shifter locating bolt too.

Oh, and sucked in for it happening in the middle of town :lol:
Author:  Bruce [ Sat Jul 23, 2011 7:04 am ]
Post subject:  Re: cant change gears
Got that bush at home (caboolture area) if ya really need one or if you can wait let me know and I post one to you.
Let me know.
Author:  Shansh [ Sat Jul 23, 2011 7:06 am ]
Post subject:  Re: cant change gears
x 2 on the bush i got one off steve huge improvement, i now need to locating grub screw, last time i drove it was like a lottery trying to find a gear
Author:  Damo [ Sat Jul 23, 2011 7:10 am ]
Post subject:  Re: cant change gears
Shansh wrote:
i now need to locating grub screw


Suzuki genuine. 09135-08006 is the part number for the M8 one. Check the thread on yours before ordering as there are 2 different ones.
Author:  burls [ Sun Jul 24, 2011 1:02 am ]
Post subject:  Re: cant change gears
Thanks

Damo my son was driving so sucked in to him. He also jammed the transfer between hi and low - nice work.

Just cleaned out the top of the gearbox - just lots of ground crap in there no bush or anything. Should there be a spring or something as well as the bush?

Bruce I'll take it if thats all I need PM your details etc
Author:  burls [ Sun Jul 24, 2011 1:11 am ]
Post subject:  Re: cant change gears
I just looked at one a of the ebay stores and they have a top and bottom bush, if thats the case I need both I think
Author:  burls [ Tue Jul 26, 2011 1:00 am ]
Post subject:  Re: cant change gears
Ok got the bushes today and its all put it back together now to put that auszooker sticker on
Author:  shep [ Tue Jul 26, 2011 1:14 am ]
Post subject:  Re: cant change gears
Damo wrote:
Shansh wrote:
i now need to locating grub screw


Suzuki genuine. 09135-08006 is the part number for the M8 one. Check the thread on yours before ordering as there are 2 different ones.


mine is a bolt that was attacked with a file to make it work :wink: :D
Author:  skyman [ Tue Jul 26, 2011 4:10 am ]
Post subject:  Re: cant change gears
Quote:
mine is a bolt that was attacked with a file to make it work


if you are in the bush, you can pull a rear diff bolt (from up high) and file the end to make one.

If you want to know how long it takes with a leatherman file...about 5 hours, and all the skin off ya thumb. 8O
Author:  dawsey [ Tue Jul 26, 2011 5:23 am ]
Post subject:  Re: cant change gears
mine came adrift a couple of months back, gear lever completely lost the plot..took out the old locating bolt and found the tapered end had disappeared broken off..reckon its down somewhere in the depths of my gear box not to worry replaced the bush and bolt..nut cost about $6.50..make sure you get the right bolt there's a large and a small..my 89 seirra took the small..
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/