auszookers.com
https://auszookers.com/forum/

dash
https://auszookers.com/forum/viewtopic.php?f=5&t=24197		 Page 1 of 1
Author:  4x4zook [ Sun Jul 24, 2011 12:29 pm ]
Post subject:  dash
hi guys. trying to get my dash cluster out of my 92 swb sierra but i cant seem to work out how it pulls out of the dash. it wont go past the hazard light switch. any tips? do i haveto take the whole dash out just to remove the cluster? cheers
Author:  foolsp33d [ Sun Jul 24, 2011 12:41 pm ]
Post subject:  Re: dash
wiggle wiggle.. then once its out, cut a small tab outta the bottom of the cluster for an easier re-fitment/removal next time...

Dont want to cut it.. live with it being a tight awkward fit I believe is the consensus...
Author:  royce [ Sun Jul 24, 2011 8:45 pm ]
Post subject:  Re: dash
2 bolts, undo the column and let it drop down a bit
Author:  Damo [ Sun Jul 24, 2011 10:10 pm ]
Post subject:  Re: dash
foolsp33d wrote:
wiggle wiggle.. then once its out, cut a small tab outta the bottom of the cluster for an easier re-fitment/removal next time...

Dont want to cut it.. live with it being a tight awkward fit I believe is the consensus...


There is a better way :crazy: Undo the 2 bolts that hold the steering column to the cross bar. You'll then be able to push the column down enough to get the cluster out.

Also remember there are 4 screws holding the cluster in, 2 countersunk ones on top of the dash and 2 screws undernear the cluster.
Author:  Gwagensteve [ Sun Jul 24, 2011 10:14 pm ]
Post subject:  Re: dash
X3 to Dropping the column.

Steve.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/