auszookers.com https://auszookers.com/forum/
Changing Shocks https://auszookers.com/forum/viewtopic.php?f=5&t=24262	Page 1 of 1

---

Author:	stocker [ Tue Jul 26, 2011 9:57 am ]
Post subject:	Changing Shocks
Fellow Auszookers I have cunundrum I want more flex (in the front) and a little more comfort out of my Vit. Was just wondering if changing the Calmini shocks to a set of OME 40mm lifted Ones would help??? or if anyone is running other brands, i know the Calmini Shocks are of Stock Length... hence the Spacers. Any thoughts?

---

Author:	atari4x4 [ Tue Jul 26, 2011 10:00 am ]
Post subject:	Re: Changing Shocks
i run OME's + the calmini strut spacer & this combo works well for me, with the latest feedback on the OME struts I'd be buying Dobinsons.

---

Author:	Chop [ Tue Jul 26, 2011 10:01 am ]
Post subject:	Re: Changing Shocks
Buzbox will be able to help with the ride difference with the new dobinsons he has up front in his.

---

Author:	stocker [ Tue Jul 26, 2011 10:02 am ]
Post subject:	Re: Changing Shocks
Dobinsons are a bit cheaper too aren't they??? Have you had to put spring retainers in???

---

Author:	atari4x4 [ Tue Jul 26, 2011 10:06 am ]
Post subject:	Re: Changing Shocks
no retainers but i do run Flaggy Vit Fab 50mm bumpstop extensions in the front & 70mm ish Glenarm Eng rear bumpstops. just for the $$$$ i'd be going the dobinsons.

---

Author:	stocker [ Tue Jul 26, 2011 10:10 am ]
Post subject:	Re: Changing Shocks
sweeet i will look at doing the same seeing as it seems to work. cheers for the advice

---

Author:	atari4x4 [ Tue Jul 26, 2011 10:13 am ]
Post subject:	Re: Changing Shocks
pull the spring out of the front end, bolt in new strut... cycle suspension & measure for bumpstop length. http://auszookers.com/index.php?name=Fo ... mpstop+diy

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/