hi guys im going to be using this fuel filter for my g16b sierra.
i bought it new from suzispares. there are no IN or OUT marked on it so i dont know what way to connect it up to the fuel lines.
Uploaded with ImageShack.us
any ideas?
| auszookers.com https://auszookers.com/forum/ |
|
| vitara efi fuel filter IN and OUT https://auszookers.com/forum/viewtopic.php?f=5&t=24295 |
Page 1 of 1 |
| Author: | dp87 [ Wed Jul 27, 2011 8:30 am ] |
| Post subject: | vitara efi fuel filter IN and OUT |
hi guys im going to be using this fuel filter for my g16b sierra. i bought it new from suzispares. there are no IN or OUT marked on it so i dont know what way to connect it up to the fuel lines.
Uploaded with ImageShack.us any ideas? |
|
| Author: | christover1 [ Wed Jul 27, 2011 8:52 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
It may have an arrow somewhere |
|
| Author: | dp87 [ Wed Jul 27, 2011 8:55 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
nope nothing... took it to my local auto one and even asked the guy there. he seems to think the bent pipe goes to the fuel pump... he didnt seem very convincing tho |
|
| Author: | christover1 [ Wed Jul 27, 2011 9:11 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
dp87 wrote: nope nothing... took it to my local auto one and even asked the guy there. he seems to think the bent pipe goes to the fuel pump... he didnt seem very convincing tho
Is it a Vitara one? I go look under mine and see if it helps. |
|
| Author: | Fatzook [ Wed Jul 27, 2011 9:13 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Vitara EFI fuel filters have threaded ends for banjo bolts. Thats a low pressure filter. EDIT: Something like this...... 
|
|
| Author: | BlueSuzy [ Wed Jul 27, 2011 9:13 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
A thanks would be nice 
|
|
| Author: | fatz [ Wed Jul 27, 2011 9:15 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Again. Same stage as you 
Bottom (straight) is in Top (bent) is out. Cheers Adam |
|
| Author: | christover1 [ Wed Jul 27, 2011 9:15 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Fatzook wrote: Vitara EFI fuel filters have threaded ends for banjo bolts. Thats a low pressure filter.
EDIT: Something like this...... Thats right, didn't wake up to that, till I went under the Vit 
|
|
| Author: | Fatzook [ Wed Jul 27, 2011 9:15 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
BlueSuzy wrote: A thanks would be nice
Wha are you on about? |
|
| Author: | Fatzook [ Wed Jul 27, 2011 9:17 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Sorry I should clarify.... The one you have MAY be an EFI filter. Or It may not. Since there are no markings on it and it looks like its ben rolling around the workshop floor for 3 years I'd ditch it and buy one that you know can be replaced with one exactly the same. |
|
| Author: | christover1 [ Wed Jul 27, 2011 9:22 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Early EFI Commodore had an in line EFI filter, that is only about $25 new. I used it on my carby Sierra, so not need to change it so often. |
|
| Author: | dp87 [ Wed Jul 27, 2011 9:24 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Yeh i think its a vitara one. its what i asked for at the shop... fatzook: does this mean what i have wont work? Tim: sorry man i got u msg lastnight in bed but it doesn't really make sense to me. i still should have msged u back. thanks anyways dude |
|
| Author: | bagnkat [ Wed Jul 27, 2011 9:30 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
I also agree straight is in, elbow is out. |
|
| Author: | stockman [ Wed Jul 27, 2011 9:30 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
It will work. Thats the filter the Balenos use. |
|
| Author: | christover1 [ Wed Jul 27, 2011 9:33 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
Use very good hose clamps/clips, as pressure of an efi pimp can be high. |
|
| Author: | BlueSuzy [ Wed Jul 27, 2011 9:35 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
hp are metal body. Lowpressure is plastic body normally. Straight barb to tank, bent barb to fuel rail. I got a commo v6 filter for my new beast, most common cheapest filter out, and barb ends for hp fuel hose and hoseclamps. Never had a prob on my last baleno'd sierra. |
|
| Author: | dp87 [ Wed Jul 27, 2011 9:36 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
ok sweet i will run it  straight is in, elbow out.
oposite to the unconvincing guy at auto1 lol Yep i bought the efi clamps already
thanks guys |
|
| Author: | BlueSuzy [ Wed Jul 27, 2011 9:42 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
and efi hose! And use original chassis lines |
|
| Author: | dp87 [ Wed Jul 27, 2011 9:51 am ] |
| Post subject: | Re: vitara efi fuel filter IN and OUT |
yep sorted i was shocked at the price of efi hose the other day when i bought it. just gotta put the filter in, connect a few water hoses and sort the wiring out for ignition. might have it running this weekend if i have time
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|