auszookers.com
https://auszookers.com/forum/

Need help with a pinout of this dizzy plug off Vitara G16B
https://auszookers.com/forum/viewtopic.php?f=5&t=24305		 Page 1 of 1
Author:  84ace [ Wed Jul 27, 2011 11:59 am ]
Post subject:  Need help with a pinout of this dizzy plug off Vitara G16B
Hi All,

This pic is the plug on the dizzy off a 97 (I think) Vitara. I need to know where all the wires went/what function they have. The loom has been cut as a microtech was fitted and now there is a new microtech to go on but seeing as i dont have the old loom i cant match the wires.

The dizzy has the crank angle sensor and coil/ignitor all in one i belive. I could be wrong but i dont see anything any where else.

Cheers
Acea
Author:  royce [ Wed Jul 27, 2011 8:19 pm ]
Post subject:  Re: Need help with a pinout of this dizzy plug off Vitara G16B
http://www.auszookers.com/index.php?nam ... ic&t=23577
Author:  84ace [ Fri Jul 29, 2011 7:11 am ]
Post subject:  Re: Need help with a pinout of this dizzy plug off Vitara G16B
royce wrote:
http://www.auszookers.com/index.php?name=Forums&file=viewtopic&t=23577


I want you all up, in and around my mouth. Thanks.

RASIGS 4 life
Acea
Author:  joe5701 [ Sat Jul 30, 2011 10:39 am ]
Post subject:  Re: Need help with a pinout of this dizzy plug off Vitara G16B
84ace wrote:
royce wrote:
http://www.auszookers.com/index.php?name=Forums&file=viewtopic&t=23577


I want you all up, in and around my mouth. Thanks.

RASIGS 4 life
Acea


WTF that dont sound right :? :? :?
Author:  Shansh [ Sat Jul 30, 2011 10:43 am ]
Post subject:  Re: Need help with a pinout of this dizzy plug off Vitara G16B
84ace wrote:
royce wrote:
http://www.auszookers.com/index.php?name=Forums&file=viewtopic&t=23577


I want you all up, in and around my mouth. Thanks.

RASIGS 4 life
Acea


ya fucken wierdo, why dont you take a long walk off a short pier
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/