auszookers.com
https://auszookers.com/forum/

Another Protec thread
https://auszookers.com/forum/viewtopic.php?f=5&t=24387		 Page 1 of 1
Author:  Damo [ Sun Jul 31, 2011 7:34 am ]
Post subject:  Another Protec thread
I know... :roll:

Buti 'm confused! I want to know the product code for the Protec camo black, 303zuke's said in this thread that it's 342-7165, but he said in this thread that it's 342-5265.

Little help!?
Author:  zooky08 [ Sun Jul 31, 2011 7:43 am ]
Post subject:  Re: Another Protec thread
for protec im sure you only need the first three number/letters
could be wrong though
Author:  pyrohamish [ Sun Jul 31, 2011 9:08 am ]
Post subject:  Re: Another Protec thread
just go to the protec shop and they will sort you out
I went and got the camo green just this week got it in a 4L enamel, had a choice of 2 pac otherwise, worst case ring them
Author:  laurie [ Sun Jul 31, 2011 10:26 am ]
Post subject:  Re: Another Protec thread
342-7165
Author:  Damo [ Sun Jul 31, 2011 10:34 am ]
Post subject:  Re: Another Protec thread
Thanks Laurie, will be callin' them tomorrow.
Author:  Damo [ Mon Aug 01, 2011 12:53 am ]
Post subject:  Re: Another Protec thread
Laurie is on the money, 342-7165 is the camo black. I was quoted $13 + gst for 1L and $48 + gst for 4L.
Author:  Zook_Fan [ Mon Aug 01, 2011 12:56 am ]
Post subject:  Re: Another Protec thread
Is it a matt or satin finish?
Author:  Damo [ Mon Aug 01, 2011 1:10 am ]
Post subject:  Re: Another Protec thread
Zook_Fan wrote:
Is it a matt or satin finish?


According to what people have said in other threads, I believe it is a satin finish.
Author:  303zuke [ Mon Aug 01, 2011 3:52 am ]
Post subject:  Re: Another Protec thread
Damo wrote:
But i 'm confused! I want to know the product code for the Protec camo black, 303zuke's said in this thread that it's 342-7165, but he said in this thread that it's 342-5265.


How embarassing!! :oops: :oops: I didn't think anyone read my posts!

The Black is definately 342-7165.
Author:  Damo [ Mon Aug 01, 2011 4:03 am ]
Post subject:  Re: Another Protec thread
303zuke wrote:
How embarassing!! :oops: :oops: I didn't think anyone read my posts!


I did a good search before I made this thread and noticed you've put up a lot of good info on the subject, so thanks!

Hopefully spraying this stuff is as easy as you say it is 8)
Author:  GT_Tony [ Tue Nov 11, 2014 8:19 am ]
Post subject:  Re: Another Protec thread
sorry for the prehistoric bump, but is this paint still available on the Gold Coast? looking at the Camo Green
Author:  303zuke [ Wed Nov 12, 2014 12:00 am ]
Post subject:  Re: Another Protec thread
There are no Protec branches on the GC, but they do have a distributor who should be able to get it in pretty quick:

Abrasive Supply
Unit 3 Centre Park 211 Brisbane Rd
Labrador , QLD 4215, Australia
Tel: 07 5537 5800

If you have difficulty, contact Protec in Bris:

Protec - Rocklea
35 Collinsvale Street
Rocklea, QLD 4106, Australia
Tel: 07 3717 3800

The Camo Green is 342-1166 and is available in 400g aerosol, 1lt tin, 4lt tin and 20lt tin.
Author:  SuziBlu [ Wed Nov 12, 2014 10:49 am ]
Post subject:  Re: Another Protec thread
On this note, how much paint is needed for a lil zuke ?
Author:  GT_Tony [ Wed Nov 12, 2014 3:15 pm ]
Post subject:  Re: Another Protec thread
303zuke wrote:
There are no Protec branches on the GC, but they do have a distributor who should be able to get it in pretty quick:

Abrasive Supply
Unit 3 Centre Park 211 Brisbane Rd
Labrador , QLD 4215, Australia
Tel: 07 5537 5800

If you have difficulty, contact Protec in Bris:

Protec - Rocklea
35 Collinsvale Street
Rocklea, QLD 4106, Australia
Tel: 07 3717 3800

The Camo Green is 342-1166 and is available in 400g aerosol, 1lt tin, 4lt tin and 20lt tin.



have ordered 10 cans through Abrasive Supplys. pick them up in the morning 8)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/