auszookers.com
https://auszookers.com/forum/

West Coast fabricators and rust repairers
https://auszookers.com/forum/viewtopic.php?f=5&t=24389		 Page 1 of 1
Author:  Che [ Sun Jul 31, 2011 7:50 am ]
Post subject:  West Coast fabricators and rust repairers
Anyone know a good fabricator over here in the west? I got a few small jobs I want done and a rust hole beginning under the windscreen I gotta sort.

I asked at couple of panel shops last week, but they got bigger jobs and not really interested in my fiddly repairs.
Author:  ajsr [ Sun Jul 31, 2011 8:21 am ]
Post subject:  Re: West Coast fabricators and rust repairers
pics
Author:  alien [ Sun Jul 31, 2011 8:23 am ]
Post subject:  Re: West Coast fabricators and rust repairers
theres a guy in balcatta - barney - company is 8ball i think? he's pretty good.
Author:  Che [ Sun Jul 31, 2011 8:56 am ]
Post subject:  Re: West Coast fabricators and rust repairers
Image

Water runs around the windscreen and comes through this newly found rust spot.


Image

Crack in the door sil, makes the whole panel flap. I better fix it before it rusts through.


Image

No idea what this crack is, will have to strip it back. Cuased when the bonnet flew open at speed


Image

I want these pushed in bits pulled back out - I can do the detail work - just need the creased bits banged out.

Image

Dodgy body mount, I need to get a new one sorted.... but I also need a new driver front side panel as their's rust behind the guard.




Now i've posted this I realise how many jobs are creeping up. Might not be worth sorting it all :cry:
Author:  MrRocky [ Sun Jul 31, 2011 9:08 am ]
Post subject:  Re: West Coast fabricators and rust repairers
i might be able to help ya out mate, you can bet the bill from a shop will nearly be more than your cars worth.
Author:  Che [ Sun Jul 31, 2011 9:31 am ]
Post subject:  Re: West Coast fabricators and rust repairers
Cheers mate - might take you up on that :)

Still might need to steal your carby for a week or two also - just putting it off as the car's been giving me the shits :? The more I spend, the more I find I need to spend to get things A1 again.


I got a motor lying around with about 180K, I think i'll save myself the hassle and just buy a rebuilt job. Just gotta decide if this zook is worth the time or if I should cut my loses and source a better project base...
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/