auszookers.com
https://auszookers.com/forum/

Staino bolts
https://auszookers.com/forum/viewtopic.php?f=5&t=24440		 Page 1 of 1
Author:  Damo [ Mon Aug 01, 2011 10:39 pm ]
Post subject:  Staino bolts
Does anyone have a hookup for mates rates? Don't want to end up with a sore bum this time :oops:
Author:  Kermy87 [ Mon Aug 01, 2011 10:44 pm ]
Post subject:  Re: Staino bolts
Bolts belong in threaded holes,, not ur arse, there's ur saw arse issue rectified and they're not that expensive , just buy em by the box
Author:  Rusho [ Mon Aug 01, 2011 11:36 pm ]
Post subject:  Re: Staino bolts
What size? Length? I know a place :wink:
Author:  Damo [ Mon Aug 01, 2011 11:37 pm ]
Post subject:  Re: Staino bolts
Rusho wrote:
What size? Length? I know a place :wink:


M8 x 1.25 & M10 x 1.25. Not sure about length, will have to check. They are for the door hinges and B-pillar
Author:  Rusho [ Mon Aug 01, 2011 11:42 pm ]
Post subject:  Re: Staino bolts
I'd you can find out length I'll have a look
Author:  Fatzook [ Tue Aug 02, 2011 12:11 am ]
Post subject:  Re: Staino bolts
If rusho's discount bolt shop fails you, I can get cracking prices on all bolts etc.
Author:  Damo [ Tue Aug 02, 2011 1:36 am ]
Post subject:  Re: Staino bolts
Door ones are M8 x 1.25 x 20mm. I'll have to wait til I get home to measure a B-pillar bolt.
Author:  JrZook [ Tue Aug 02, 2011 1:42 am ]
Post subject:  Re: Staino bolts
Fatzook wrote:
If rusho's discount bolt shop fails you, I can get cracking prices on all bolts etc.


Sweet! 8)
Author:  94BAZOOKA [ Tue Aug 02, 2011 1:46 am ]
Post subject:  Re: Staino bolts
Damo wrote:
Door ones are M8 x 1.25 x 20mm. I'll have to wait til I get home to measure a B-pillar bolt.



I used them in both my doors and b pillar
Author:  Damo [ Tue Aug 02, 2011 1:49 am ]
Post subject:  Re: Staino bolts
94BAZOOKA wrote:
Damo wrote:
Door ones are M8 x 1.25 x 20mm. I'll have to wait til I get home to measure a B-pillar bolt.



I used them in both my doors and b pillar


Thanks mate, that was just the info I was looking for! :helloo:
Author:  Rusho [ Tue Aug 02, 2011 2:01 am ]
Post subject:  Re: Staino bolts
How do you tell the pitch of a bolt?? :oops:
Author:  94BAZOOKA [ Tue Aug 02, 2011 2:04 am ]
Post subject:  Re: Staino bolts
Rusho wrote:
How do you tell the pitch of a bolt?? :oops:



By using a tread pitch gauge
Author:  Damo [ Tue Aug 02, 2011 2:05 am ]
Post subject:  Re: Staino bolts
Image

Image
Author:  Rusho [ Tue Aug 02, 2011 2:07 am ]
Post subject:  Re: Staino bolts
Without one of them :lol:
Author:  Damo [ Tue Aug 02, 2011 2:08 am ]
Post subject:  Re: Staino bolts
Rusho wrote:
Without one of them :lol:


Vernier+

Image
Author:  tanshi [ Tue Aug 02, 2011 2:08 am ]
Post subject:  Re: Staino bolts
goto super cheap and use their thread test thinggies
Author:  Damo [ Tue Aug 02, 2011 2:09 am ]
Post subject:  Re: Staino bolts
tanshi wrote:
goto super cheap and flog a thread test thinggy


Fixed :P :lol:
Author:  Rusho [ Tue Aug 02, 2011 10:46 am ]
Post subject:  Re: Staino bolts
Negative...all of stainless is M10 and bigger. Had a bit of M8 but way too long and wrong thread :cry:
Author:  TZAR [ Tue Aug 02, 2011 11:32 am ]
Post subject:  Re: Staino bolts
What are you chasing first

Do you want bolts that like the original with screww heads and nice smooth domed tops, cap screws, standard bolts, torx head bolts

here are some dome head titaniaum bolts
http://www.pro-bolt.com/Products/Titani ... _Dome_Head

and here are polished stainless dome head m8 x 1.25 x 20 pack of 10 for $30
http://www.pro-bolt.com/Products/0005001a0001
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/